Papers

By Author       By Theme

By Author - M

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

	Macchietto, S.
A Numerical Experiment Design Study on a Biodiesel Production Process MS-017 p. 349 Initiation and Inhibiting Mechanisms for Multi-tasking Control in Discrete Event Systems PO-116 p. 1009

	Machado, P. F. M. P. B.
Development of a Software to Simulate Free Radical Polymerization of Linear and Branched Polymers Using Mono- and Bi- Functional Initiators MS-049 p. 445

	Madhavan, K. P.
Integration of Planning and Scheduling in Multi-site Plants – Application to Paper Manufacturing IA-016 p. 1621

	Madhusudana Rao, R.
A Dynamic Spherical Agglomerate Model for Proton Exchange Membrane Fuel Cells (PEMFC) MS-095 p. 541

	Madsen, H.
Modelling for Control of Industrial Fermentation PO-103 p. 1351

	Magatão, L.
Using CLP and MILP for Scheduling Commodities in a Pipeline PO-170 p. 1027

	Malatesta, C.
An ASCEND Library for the Modelling, Simulation and Optimization of Solvent Extraction for Metal Recovery MS-027 p. 403

	Malik, R. K.
Efficient Feed Preheat Targeting for Distillation by Feed Splitting PD-022 p. 751

	Mamprin, J.
Utilities Systems On-Line Optimization and Monitoring: Experiences from the Real World PO-003 p. 1159

	Mangold, M.
Numerical Analysis of Higher-Order Singularities in Complex Process Models in ProMoT CM-059 p. 223

	Mantalaris, A.
Dynamic Model of MAb Production and Glycosylation for the purpose of Product Quality Control MS-083 p. 307

	Manthanwar, A. M.
Robust Model-Based Predictive Controller for Hybrid System via Parametric Programming PO-055 p. 1249

	Maravelias, C. T.
On the State-Task Network Formulation: Time Representations PO-084 p. 1039

	Marchetti, A.
Measurement-Based Run-to-run Optimization of a Batch Reaction-Distillation System PO-136 p. 1417

	Marchetti, J. L.
IMC Design of Cascade Control PO-052 p. 1243 Minimum-Cost Operation in Heat-Exchanger Networks PO-146 p. 979

	Marcos, R. M.
A Molecular-based Equation of State for Process Engineering MS-071 p. 505

	Maréchal, F.
Application of Multi-Objective Optimisation to Process Measurement System Design PO-117 p. 1153

	Markót, M. Cs.
Use of Interval Optimization for finding Limiting Flows of Batch Extractive Distillation PD-087 p. 661

Marquardt, W.

A Framework for the Mixed Integer Dynamic Optimisation of Waste Water Treatment Plants using Scenario-Dependent Optimal Control PO-074 p. 955 A Library for Equation System Processing based on the CAPE-OPEN ESO Interface IA-018 p. 1573 Application of the Rectification Body Method to Batch Rectification PD-030 p. 757 Design and Optimization of Layer Crystallization Processes PD-081 p. 871 Semi-empirical Process Modelling with Integration of Commercial Modelling Tools MS-119 p. 595

Martin, E. B.

Enhanced modelling of an industrial fermentation process through data fusion techniques PO-127 p. 1393 Multivariate Decision Trees for the Interrogation of Bioprocess Data PO-128 p. 1129 Statistical Performance Monitoring Using State Space Modelling and Wavelet Analysis PO-178 p. 1459 The Integration of Process and Spectroscopic Data for Enhanced Knowledge Extraction in Batch Processes PO-142 p. 1141

	Martínez Chapa, S. O.
Linear Quadratic Control Problem in Biomedical Engineering PO-033 p. 1195

	Martínez, E.
Performance Monitoring of Industrial Controllers Based on the Predictability of Controller Behavior PO-134 p. 1099

	Martínez, E. C.
Model Discrimination and Selection in Evolutionary Optimization of Batch Processes with Tendency Models MS-055 p. 463 The Statistical Simplex Method for Experimental Optimization with Process Data CM-002 p. 31

	Martínez, J. L.
Performance Monitoring of Industrial Controllers Based on the Predictability of Controller Behavior PO-134 p. 1099

	Martinez, P.
Environmental Life Cycle Assessment as a tool for Process Optimisation in the Utility Sector PD-061 p. 853

	Martín-Sistac, C.
A Robust Hybrid Search Technique for Solving Distributed Wastewater Treatment Systems PD-026 p. 949

	Maschke, B.
Multi-Scale Distributed Parameter Model of an Adsorption Column using a Bond Graph Approach MS-146 p. 625

	Massebeuf, S.
Heterogeneous Batch Distillation Processes: Real System Optimization PO-014 p. 1081

	Matos, H. A.
AquoMin: Targeting and Design of Mass-Exchange Networks featuring Regeneration Recycle PD-082 p. 685

	Maulud, A. H. S.
Wavelet-Based Nonlinear Multivariate Statistical Process Control PO-088 p. 1321

	Mele, F. D.
An Agent-Based Approach for Supply Chain Retrofitting under Uncertainty IA-039 p. 1555 Event-Based Approach for Supply Chain Fault Analysis PO-061 p. 1261 Supply Chain Management through a Combined Simulation-Optimisation Approach PO-133 p. 1405 Supply Chain Monitoring: A Statistical Approach PO-122 p. 1375

	Mendez, C. A.
MINLP model for synthesis of Paraxylene Separation Processes based on Crystallization Technology PD-051 p. 829

	Méndez, M. R.
Optimization Under Fuzzy If-Then Rules Using Stochastic Algorithms CM-038 p. 181

	Mesa, P. V. R.
Modeling and Parameter Estimation of Nitroxide Mediated Living Free Radical Polymerization (NMRP) of Styrene MS-123 p. 1699

	Mészáros, A.
Robust Controller Design for a Chemical Reactor PO-077 p. 1303

	Meyer, M.
A "MINLP" Formulation for Optimal Design of a Catalytic Distillation Column Based on a Generic Non-Equilibrium Model PD-103 p. 925 Infinite/infinite Analysis as a Tool for an Early Oriented Synthesis of a Reactive Pressure Swing Process CM-055 p. 97 Reactive Distillation Modelling and Sensitivity Analysis Based on NEQ Model MS-117 p. 583

	Meyer, X.
A "MINLP" Formulation for Optimal Design of a Catalytic Distillation Column Based on a Generic Non-Equilibrium Model PD-103 p. 925 Infinite/infinite Analysis as a Tool for an Early Oriented Synthesis of a Reactive Pressure Swing Process CM-055 p. 97 Reactive Distillation Modelling and Sensitivity Analysis Based on NEQ Model MS-117 p. 583

	Michaels, D.
Optimal Process Design for the Synthesis of 2,3-Dimethyl butene-1 PD-059 p. 847

	Michiel Meeuse, F.
Process Synthesis applied to the Food Industry PD-112 p. 937

	Mikkola, J.-P.
Modelling and Simulation of Porous, Reactive Particles in Liquids: Delignification of Wood MS-129 p. 325

	Milán-Yañez, D.
Optimal Synthesis of Distillation Columns: Integration of Process Simulators in a Disjunctive Programming Environment. PD-007 p. 715

	Milewska, A.
CFD Modelling and Divergence Criterion for Safety of Chemical Reactors MS-070 p. 259

	Mitsos, A.
Optimal Start-up of Micro Power Generation Processes PO-041 p. 1093

	Mjaavatten, A.
Opportunities and Challenges of Using Sequential Quadratic Programming (SQP) for Optimization of Petroleum Production Networks CM-029 p. 169

	Modigell, M.
Simulation of a cement plant using thermochemical and flow simulation tools MS-006 p. 361

	Moilanen, P.
Modelling Fermenters with CFD PD-023 p. 709

	Mole, T. L.
A Systematic Approach for Synthesis of Optimal Polymer Films for Radioactive Decontamination and Waste Reduction IA-015 p. 1615

	Molga, E.
CFD Modelling and Divergence Criterion for Safety of Chemical Reactors MS-070 p. 259

	Montague, G.
Enhanced modelling of an industrial fermentation process through data fusion techniques PO-127 p. 1393 Multivariate Decision Trees for the Interrogation of Bioprocess Data PO-128 p. 1129

	Montolio-Rodriguez, D.
Rapid Screening of Conceptual Reactive Separation Process Options PD-069 p. 865

	Morales Díaz, A. B.
Operational Planning of Crude Oil Processing Terminals PO-066 p. 1273

	Morales-Menéndez, R.
Linear Quadratic Control Problem in Biomedical Engineering PO-033 p. 1195

	Moreno-López, M. J.
The Escape Time of small heavy Particles from a 3D Vortex MS-038 p. 421

Morris, A. J.

A Computer Architecture to Support the Operation of Virtual Organisations for the Chemical Development Lifecycle IA-010 p. 1597 Multivariate Decision Trees for the Interrogation of Bioprocess Data PO-128 p. 1129 Statistical Performance Monitoring Using State Space Modelling and Wavelet Analysis PO-178 p. 1459 The Integration of Process and Spectroscopic Data for Enhanced Knowledge Extraction in Batch Processes PO-142 p. 1141

	Mortazavi, S. M. M.
Mathematical Modeling of Ethylene Polymerization with Ziegler-Natta Catalyst MS-030 p. 1687

	Mostoufi, N.
Modelling the Two-Stage Pyrolysis Gasoline Hydrogenation MS-051 p. 451

	Mouton, G.
Modelling of Sulphur Deposition in Natural Gas PD-043 p. 799

	Mrziglod, T.
Semi-empirical Process Modelling with Integration of Commercial Modelling Tools MS-119 p. 595 With Data-Based Models and Design of Experiments towards Successful Products - Concept of the Product Design Workbench PD-056 p. 703

	Munawar, S. A.
Integration of Planning and Scheduling in Multi-site Plants – Application to Paper Manufacturing IA-016 p. 1621

	Munir, A.
A Framework for Product Analysis: Modelling and Design of Release and Uptake of Pesticides PD-017 p. 733

	Muradore, R.
Using Structured and Unstructured Estimators for Distillation Units: A Critical Comparison PO-039 p. 1201

	Muro-Suñé, N.
A Framework for Product Analysis: Modelling and Design of Release and Uptake of Pesticides PD-017 p. 733

	Murzin, D. Yu.
An Integrated Approach to Modelling of Chemical Transformations in Chemical Reactors IA-046 p. 1531

	Mussati, M. C.
A Three-Phase Fluidized Bed Anaerobic Biofilm Reactor Model for Treating Complex Substrates MS-102 p. 553

	Musulin, E.
Closing the Information Loop in Recipe-Based Batch Production PO-123 p. 1381 Supply Chain Monitoring: A Statistical Approach PO-122 p. 1375

	Myers, J.
MINLP model for synthesis of Paraxylene Separation Processes based on Crystallization Technology PD-051 p. 829