Papers

By Author       By Theme

By Author - G

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

	Gabriel, D.
Development and Validation of a Dynamic Complex Model for Ammonia Removal by Gas-Phase Biofiltration MS-124 p. 337

	Gadalla, M.
A New Approach to the Design of Internally Heat-Integrated Tray Distillation Columns PD-044 p. 805

	Galan, M. I.
Infinite/infinite Analysis as a Tool for an Early Oriented Synthesis of a Reactive Pressure Swing Process CM-055 p. 97

	Gálvez, E. D.
An ASCEND Library for the Modelling, Simulation and Optimization of Solvent Extraction for Metal Recovery MS-027 p. 403

	Gamisans, X.
Development and Validation of a Dynamic Complex Model for Ammonia Removal by Gas-Phase Biofiltration MS-124 p. 337

	Gangadwala, J.
Optimal Process Design for the Synthesis of 2,3-Dimethyl butene-1 PD-059 p. 847

Gani, R.

A Framework for Product Analysis: Modelling and Design of Release and Uptake of Pesticides PD-017 p. 733 Design and Control Structure Integration from a Model-Based Methodology for Reaction-Separation with Recycle Systems IA-017 p. 1519 Design and Operation of Copolymerisation Reactors through Modelling and Non-Linear Analysis MS-048 p. 439 Integrated Chemical Product-Process Design: CAPE Perspectives APL-03 p. 21 Novel Group Contribution Based Approach in Process Flowsheet Synthesis, Design and Modelling PD-016 p. 643 Short-Path Evaporation for Chemical Product Modelling, Analysis and Design PD-054 p. 841

	Gao, Y.
Agent-Based Intelligent System Development for Decision Support in Chemical Process Industry PO-124 p. 1387

	García, M. G.
A Software Toolbox for the Dynamic Optimization of Nonlinear Processes CM-006 p. 121

	García, M. R.
An Efficient Real-Time Dynamic Optimisation Architecture for the Control of Non-Isothermal Tubular Reactors PO-099 p. 1333

	Garea, A.
Simulation of the o-Xylene Oxidation into Phthalic Anhydride: Rigorous Multitubular Catalytic Reactor Modelling and Exportation into the Process Flowsheet MS-087 p. 253

	Garyulo, L.
Predictve Functional Control Applied to Multicomponent Batch Distillation Column PO-180 p. 1465

	Georgiadis, M. C.
Modelling and Optimisation of Industrial Absorption Processes: An EC Collaborative Research Project IA-007 p. 1525 On the Optimization of Hydrogen Storage in Metal Hydride Beds PD-031 p. 763

	Gerbaud, V.
Feasibility Study of Heterogeneous Batch Extractive Distillation PD-088 p. 895 Heterogeneous Batch Distillation Processes: Real System Optimization PO-014 p. 1081

	Gesthuisen, R.
Model Based Operation of Emulsion Polymerisation Reactors with Evaporative Cooling: Application to Vinyl Acetate Homopolymerization PO-059 p. 1255

	Ghaeli, M.
Novel Scheduling of a Mixed Batch/Continuous Sugar Milling Plant using Petri nets PO-008 p. 991

	Ghafelebashi Zarand, S. M.
Mathematical Modeling of Ethylene Polymerization with Ziegler-Natta Catalyst MS-030 p. 1687

	Ghraizi, R. A.
Performance Monitoring of Industrial Controllers Based on the Predictability of Controller Behavior PO-134 p. 1099

	Gibert, F. B.
Expert System for the Control of Emergencies of a Process Plant PO-013 p. 1489

	Gimeno, L.
Constraints Propagation Techniques in Batch Plants Planning and Scheduling PO-048 p. 1225

	Ginkel, M.
Numerical Analysis of Higher-Order Singularities in Complex Process Models in ProMoT CM-059 p. 223

	Ginsberg, T.
Simulation of a cement plant using thermochemical and flow simulation tools MS-006 p. 361

	Glavič, P.
Optimization by Stage-Wise Model for Complex Industrial Heat Exchanger Network MS-009 p. 343

	Goel, V.
A Lagrangean Duality based Branch and Bound for Solving Linear Stochastic Programs with Decision Dependent Uncertainty CM-033 p. 55

	Gomes Salema, M. I.
Design and Planning of Supply Chains with Reverse Flows PO-140 p. 1075

	Gomes, V. G.
An Expert System for a Semi-Batch Pilot Scale Emulsion Copolymerisation Facility PO-016 p. 1495

	Gómez, J. M.
A "MINLP" Formulation for Optimal Design of a Catalytic Distillation Column Based on a Generic Non-Equilibrium Model PD-103 p. 925

	Gómez-Martínez, B.
Evaluation of Nanofiltration Processes for Brackish Water Treatment using the DSPM Model MS-052 p. 457

	Gonnet, S.
Information Logistics for Supply Chain Management within Process Industry Environments PO-049 p. 1231

	González, A. H.
Minimum-Cost Operation in Heat-Exchanger Networks PO-146 p. 979

	González, W.
Anaerobic Digestion Process Parameter Identification and Marginal Confidence Intervals by Multivariate Steady State Analysis and Bootstrap. PO-095 p. 1327

	Goyal, V.
Stochastic MINLP Optimization using Simplicial Approximation CM-058 p. 61

	Gozálvez-Zafrilla, J. M.
Evaluation of Nanofiltration Processes for Brackish Water Treatment using the DSPM Model MS-052 p. 457

	Graells, M.
A Robust Hybrid Search Technique for Solving Distributed Wastewater Treatment Systems PD-026 p. 949 On-line Fault Diagnosis Support for Real Time Evolution applied to Multi-Component Distillation PO-121 p. 961

	Grén, U.
Diabatic Distillation – Comments on the Influence of Side Streams MS-075 p. 511

	Grievink, J.
Framework for Proper Integration of Flexibility in Conceptual Designs of Energy and Industrial Infrastructures PD-038 p. 781 Modelling and Optimisation of Industrial Absorption Processes: An EC Collaborative Research Project IA-007 p. 1525 Nonlinear Approach to Design of Monolithic Loop Reactor for Fischer-Tropsch Synthesis PD-034 p. 769

	Griffiths, J. F.
A Dynamic Approach to the Dimension Reduction of Chemical Kinetic Schemes MS-013 p. 229 A Polynomial Repro-Model Applied to Propane Cracking MS-015 p. 373

Grossmann, I. E.

A Lagrangean Duality based Branch and Bound for Solving Linear Stochastic Programs with Decision Dependent Uncertainty CM-033 p. 55 MINLP model for synthesis of Paraxylene Separation Processes based on Crystallization Technology PD-051 p. 829 Optimal Synthesis of an Emulsion Pertraction Process for the Removal of Pollutant Anions in Industrial Wastewater Systems PO-172 p. 649 Optimal Synthesis of Distillation Columns: Integration of Process Simulators in a Disjunctive Programming Environment. PD-007 p. 715

	Grünewald, M.
Particle-scale Heat Removal in Fixed-bed Catalytic Reactors: Modelling and Optimisation of a Desorptive Cooling Process PD-063 p. 673

	Guardiola Soler, J.
State Space Analysis: a Tool for Progress CM-024 p. 43

	Gudi, R. D.
Integration of Planning and Scheduling in Multi-site Plants – Application to Paper Manufacturing IA-016 p. 1621

	Guhe, S. Y.
Observability Matrix Condition Number in Design of Measurement Strategies MS-023 p. 397

	Guillén, G.
An Agent-Based Approach for Supply Chain Retrofitting under Uncertainty IA-039 p. 1555 Integrating Short-Term Budgeting into Multi-site Scheduling IA-040 p. 1663

	Guisasola, A.
Simulation of a Novel Strategy for Improving a Biological Phosphorus Removal System Start-up MS-062 p. 475

	Gut, J. A. W.
Optimal Design of Continuous Sterilization Processes with Plate Heat Exchangers PD-101 p. 919