Papers

By Author       By Theme

By Theme - MS

Plenary Lectures Computing Methods for CAPE Modelling and Simulation Process and Product Design Process Operation and Control Integrated Approaches in CAPE

	H. Huang, M. Fairweather, A. S. Tomlin, J. F. Griffiths and R. B. Brad
A Dynamic Approach to the Dimension Reduction of Chemical Kinetic Schemes MS-013 p. 229

	I. P. Androulakis
New Approaches for Representing, Analyzing and Visualizing Complex Kinetic Mechanisms MS-113 p. 235

	S. Pierucci, E. Ranzi, M. Dente and S. Barendregt
A Kinetic Generator of Hydrocarbon Pyrolysis Mechanisms MS-144 p. 241

	I. Banerjee and M. G. Ierapetritou
An Adaptive Reduction Scheme to Develop Flexible Reduced Chemistry Models for Reactive Flow Simulations MS-036 p. 247

	J. A. Jara, A. Garea and J. A. Irabien
Simulation of the o-Xylene Oxidation into Phthalic Anhydride: Rigorous Multitubular Catalytic Reactor Modelling and Exportation into the Process Flowsheet MS-087 p. 253

	A. Milewska, L. Rudniak and E. Molga
CFD Modelling and Divergence Criterion for Safety of Chemical Reactors MS-070 p. 259

	I. T. Cameron, E. S. Fraga and I. D. L. Bogle
Process Modelling Goals: Concepts, Structure and Development MS-080 p. 265

	H. A. Preisig
Computer-aided modelling: A study on the dynamic flash MS-136 p. 271

	G. Cholakov, R. Stateva, M. Shacham and N. Brauner
Identifying Equations that Represent Properties in Homologous Series using Structure-Structure Relations MS-007 p. 277

	M. E. Pons
CAPE-OPEN Consultancy Scheme MS-057 p. 283

	V. C. Hass, F. Kuhnen and K.-M. Schoop
An Environment for the Development of Operator Training Systems (OTS) from Chemical Engineering Models MS-120 p. 289

	J. Klemeš, I. Bulatov and T. Cockerill
Techno-Economic Modelling and Cost Functions of CO2 Capture Processes MS-142 p. 295

	I. Joensuu, M. Piironen and E. Juuso
Dynamic Simulator for Dosing of Water Treatment Chemicals MS-090 p. 301

	C. Kontoravdi, S. P. Asprey, E. N. Pistikopoulos and A. Mantalaris
Dynamic Model of MAb Production and Glycosylation for the purpose of Product Quality Control MS-083 p. 307

	K. Wekenborg, A. Susanto and H. Schmidt-Traub
Modelling and Validated Simulation of Solvent-Gradient Simulated Moving Bed (SG-SMB) Processes for Protein Separation MS-072 p. 313

	P. Pladis, A. H. Alexopoulos, J. Bousquet and C. Kiparissides
Modelling of Vinylidene Fluoride Emulsion Polymerization MS-042 p. 319

	T. Salmi, J. Wärnå, J.-P. Mikkola and M. Rönnholm
Modelling and Simulation of Porous, Reactive Particles in Liquids: Delignification of Wood MS-129 p. 325

	A. Shilkin and E. Y. Kenig
Fluid Separation Modelling in the Columns Equipped with Structured Packings using the Hydrodynamic Analogy MS-032 p. 331

	G. Baquerizo, X. Gamisans, D. Gabriel and J. Lafuente
Development and Validation of a Dynamic Complex Model for Ammonia Removal by Gas-Phase Biofiltration MS-124 p. 337

	A. Kovač Kralj and P. Glavič
Optimization by Stage-Wise Model for Complex Industrial Heat Exchanger Network MS-009 p. 343

	G. Franceschini and S. Macchietto
A Numerical Experiment Design Study on a Biodiesel Production Process MS-017 p. 349

	H. J. Pasman, A. A. Pekalski and M. Braithwaite
To Enable a Better CAPE: The EU SAFEKINEX Project MS-003 p. 355

	T. Ginsberg, D. Liebig, M. Modigell, K. Hack and S. Yousif
Simulation of a cement plant using thermochemical and flow simulation tools MS-006 p. 361

	R. Caulkin, M. Fairweather, X. Jia and R. A. Williams
A Numerical Case Study of Packed Columns MS-014 p. 367

	R. B. Brad, M. Fairweather, A. S. Tomlin and J. F. Griffiths
A Polynomial Repro-Model Applied to Propane Cracking MS-015 p. 373

	M. Fairweather and J. P. Hurn
Validation of a Model of Dilute Two-Phase, Gas-Solid Turbulent Flows MS-016 p. 379

	A. II. Boyarinov and S. I. Duev
Study of an Influence of the Parameters on Multiplicity of Steady States in the Recycle System: Reactor - Separating Unit. MS-019 p. 385

	V. Kumar and M. Schuhmacher
Fuzzy Uncertainty Analysis in System Modelling MS-022 p. 391

	J. A. Wilson and S. Y. Guhe
Observability Matrix Condition Number in Design of Measurement Strategies MS-023 p. 397

	E. D. Gálvez, R. E. Swaney, C. Malatesta and L. A. Cisternas
An ASCEND Library for the Modelling, Simulation and Optimization of Solvent Extraction for Metal Recovery MS-027 p. 403

	N. P. G. Salau, A. R. Secchi, J. O. Trierweiler and G. A. Neumann
Dynamic Behaviour and Control of an Industrial Fluidised-Bed Polymerisation Reactor MS-028 p. 409

	O. Villain, R. Faber, P. Li, J.-U. Repke and G. Wozny
Three-Phase Distillation in Packed Towers: Short-Cut Modelling and Parameter Tuning MS-034 p. 415

	U. Sánchez and M. J. Moreno-López
The Escape Time of small heavy Particles from a 3D Vortex MS-038 p. 421

	G. Dompazis, A. Roussos, V. Kanellopoulos and C. Kiparissides
Dynamic Evolution of the Particle Size Distribution in Multistage Olefin Polymerization Reactors MS-043 p. 427

	A. H. Alexopoulos and C. Kiparissides
Solution of the Bi-variate Dynamic Population Balance Equation in Batch Particulate Systems MS-044 p. 433

	T. Lopez-Arenas, M. Sales-Cruz and R. Gani
Design and Operation of Copolymerisation Reactors through Modelling and Non-Linear Analysis MS-048 p. 439

	P. F. M. P. B. Machado and L. M. F. Lona
Development of a Software to Simulate Free Radical Polymerization of Linear and Branched Polymers Using Mono- and Bi- Functional Initiators MS-049 p. 445

	N. Mostoufi, M. Ahmadpour and R. Sotudeh-Gharebagh
Modelling the Two-Stage Pyrolysis Gasoline Hydrogenation MS-051 p. 451

	J. M. Gozálvez-Zafrilla, B. Gómez-Martínez and A. Santafé-Moros
Evaluation of Nanofiltration Processes for Brackish Water Treatment using the DSPM Model MS-052 p. 457

	E. C. Martínez
Model Discrimination and Selection in Evolutionary Optimization of Batch Processes with Tendency Models MS-055 p. 463

	X. Zhang, L. Yan, G. Yu, S. Zhang and W. Dai
Simulation of Heavy-Oil Thermal Cracking Process on the basis of Carbon Number-Based Component Approach MS-061 p. 469

	A. Guisasola, M. Pijuan, J. Baeza, J. Carrera, C. Casas and J. Lafuente
Simulation of a Novel Strategy for Improving a Biological Phosphorus Removal System Start-up MS-062 p. 475

	G. D. Ingram and I. T. Cameron
Formulation and Comparison of Alternative Multiscale Models for Drum Granulation MS-064 p. 481

	D. Rizal, S. Tani, K. Nishiyama and K. Suzuki
Dynamic Simulator for Evaluation of Safety Objects in Batch Process MS-065 p. 487

	L. T. T. Vu, R. J. Durham, J. A. Hourigan and R. W. Sleigh
Dynamic Modelling and Simulation of Lactose Cooling Crystallisation: from Batch and Semi-Batch to Continuous Operations MS-066 p. 493

	Q. Pan, E. Lu and J. Li
Rigorous Dynamic Simulation and Optimization for FCCU Absorption-Stabilization System MS-067 p. 499

	L. F. Vega, J. C. Pàmies, F. Llovell, C. Herdes, D. Duque and R. M. Marcos
A Molecular-based Equation of State for Process Engineering MS-071 p. 505

	I. Niklasson Bjorn, U. Grén and A. P. Soemardji
Diabatic Distillation – Comments on the Influence of Side Streams MS-075 p. 511

	Y. Lim
Modeling and Prediction of Cell Population Dynamics MS-077 p. 517

	M. Türkay, F. Üney and Ö. Yilmaz
Prediction of Folding Type of Proteins using Mixed-Integer Linear Programming MS-086 p. 523

	G. Bozzano and M. Dente
A Mechanistic Approach to Delayed Coking Modelling MS-088 p. 529

	E. Németh, R. Lakner, K. M. Hangos and I. T. Cameron
Prediction-Based Diagnosis and Loss Prevention using Qualitative Multi-Scale Models MS-091 p. 535

	R. Madhusudana Rao and R. Rengaswamy
A Dynamic Spherical Agglomerate Model for Proton Exchange Membrane Fuel Cells (PEMFC) MS-095 p. 541

	M. I. Karpunina, A. Lieb, M. Kind and E. M. Koltsova
Modelling and Simulation of Crystallization Processes in a FC-Crystallizer. MS-100 p. 547

	M. Fuentes, M. C. Mussati, P. A. Aguirre and N. J. Scenna
A Three-Phase Fluidized Bed Anaerobic Biofilm Reactor Model for Treating Complex Substrates MS-102 p. 553

	A. C. Papes Filho and R. M. Filho
Concurrent Engineering Reactor Design MS-108 p. 559

	C. J. G. Vasconcelos, R. M. Filho, R. Spandri and M. R. Wolf-Maciel
Dynamic Models towards Operator and Engineer Training: Virtual Environment MS-110 p. 565

	J. Ryu
A Multi-Level Programming Optimization Approach to Enterprise-wide Supply Chain Planning MS-111 p. 571

	J. Wu and I. P. Androulakis
Exploring Classifiability Metrics for Selecting Informative Genes MS-114 p. 577

	D. Rouzineau, M. Meyer, M. Prevost, X. Meyer and J. M. Reneaume
Reactive Distillation Modelling and Sensitivity Analysis Based on NEQ Model MS-117 p. 583

	J. Fernandes, J. J. Verstraete, C. C. Pinheiro, N. Oliveira and F. Ramôa Ribeiro
Mechanistic Dynamic Modelling of an Industrial FCC Unit MS-118 p. 589

	G. Schopfer, O. Kahrs, W. Marquardt, M. Warncke, T. Mrziglod and A. Schuppert
Semi-empirical Process Modelling with Integration of Commercial Modelling Tools MS-119 p. 595

	I. V. Soboleva and E. M. Koltsova
Mathematical Modelling of Reaction Kinetics Applied for Industrial Dehydrate Method of P2O5 Production MS-126 p. 601

	L. Testard and J. P. Belaud
A CAPE-OPEN based Framework for Process Simulation Solutions Integration MS-132 p. 607

	R. Aguado, S. Alvarez, M. J. San José, M. Olazar and J. Bilbao
Gas Flow Distribution Modelling in Conical Spouted Beds MS-135 p. 613

	F. Jiménez, M. Núñez and V. Kafarov
Study and Modelling of Simultaneous Hydrodesulfurization, Hydrodenitrogenation and Hydrodearomatization on Vacuum Gas Oil Hydrotreatment MS-139 p. 619

	F. Couenne, D. Eberard, L. Lefèvre, C. Jallut and B. Maschke
Multi-Scale Distributed Parameter Model of an Adsorption Column using a Bond Graph Approach MS-146 p. 625

	M. Yuccer, I. Atasoy and R. Berber
An Integration Based Optimization Approach for Parameter Estimation in Dynamic Models MS-148 p. 631

	S. M. Ghafelebashi Zarand and S. M. M. Mortazavi
Mathematical Modeling of Ethylene Polymerization with Ziegler-Natta Catalyst MS-030 p. 1687

	R. M. Filho, H. C. Aguiar and N. V. Polowisk
Hybrid Modelling Development for a Continuous Industrial Kraft Pulping Digester MS-107 p. 1693

	P. V. R. Mesa, J. Belincanta and L. M. F. Lona
Modeling and Parameter Estimation of Nitroxide Mediated Living Free Radical Polymerization (NMRP) of Styrene MS-123 p. 1699