Conference Agenda
Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).
|
Session Overview |
Date: Sunday, 18/Sept/2022 | |
4:00pm - 6:00pm |
EFCE - Meeting: Working party on fluid separations Location: Room 1 |
6:00pm - 7:30pm |
Welcome: Registration & cocktail sponsorised by Koch-Glitsch |
7:30pm - 9:30pm |
Student event: Sponsored by Arkema La Table du Belvédère - 11 Bd des Récollets TOULOUSE |
Date: Monday, 19/Sept/2022 | ||
8:30am - 9:00am |
Registration |
|
9:00am - 9:30am |
Openning ceremony |
|
9:30am - 10:30am |
Plenary_1 Location: Room 1 Chair: Hendrik Adriaan Kooijman, Shell Global Solutions International BV, Netherlands, The Absorption and CO2 capture Total Energies, France |
|
10:30am - 11:00am |
Coffee break1: Sponsored by Arkema |
|
11:00am - 12:40pm |
Topic_5_A: Process operation and troubleshooting Location: Room 2 Chair: Ralf Proplesch, DSM Nutritional Products, Switzerland First Impressions of Multiple Dividing Wall Column Operation: Design and First Experimental Results Ulm University, Institute of Chemical Engineering, Thermal Process Engineering New aspects of modeling and operation of nitrous gas absorption in packed columns ENVIMAC Engineering GmbH, Germany Experimental investigation of foam in packed distillation columns Technical University of Braunschweig, Germany Automated detection of loading and flooding points in packed columns Montanuniversität Leoben, Austria |
Topic_6_A: Energy and sustainability in separation processes Location: Room 1 Chair: Mario Roza, Sulzer, Switzerland Carbon Dioxide Removal from the atmosphere by weathering minerals in a gas-liquid-solid contactor. 1: University of Oxford, United Kingdom; 2: Loughborough University; 3: Geociencias Barcelona Development of a novel industrial process for stripping of carbon dioxide and ammonia from bioprocess wastewater 1: SULZER CHEMTECH AG, Switzerland; 2: Institute of Energy and Process Engineering, ETH Zurich, Switzerland Reactive distillation of mixtures containing formaldehyde, methanol, water, and poly(oxymethylene) dimethyl ethers on pilot-scale 1: Technical University of Munich, Laboratory of Chemical Process Engineering, Straubing/Germany; 2: Technische Universität Kaiserslautern, Laboratory of Engineering Thermodynamics, Kaiserslautern/Germany Modeling, validation, exergy evaluation and optimization of an industrial cryogenic air distillation plant under variable demand Universidad Nacional de Colombia, Colombia |
12:40pm - 2:00pm |
Lunch1 |
|
2:00pm - 3:00pm |
Plenary_2 Location: Room 1 Chair: Jens-Uwe Repke, TU Berlin, Germany Horizon Europe support for the European Green Deal HaDEA, Danemark |
|
3:00pm - 4:40pm |
Topic_5_B: Process operation and troubleshooting Location: Room 2 Chair: Tony Cai, Fractionation Research, Inc., United States of America Troubleshooting a Column - Problem and Solution 1: Nobian GmbH, Germany; 2: Siemens AG, Germany Digitalization of a Periodic Stripper Unit for Real-Time Data Integration with Predictive Modelling Department of Chemical and Biochemical Engineering, Technical University of Denmark, Denmark Root Cause Analysis for Structured Packing Failure (Case Study) Saudi Aramco, Saudi Arabia How to calculate column hydraulics considering operational effects WelChem Process Technology GmbH, Germany |
Topic_6_B: Energy and sustainability in separation processes Location: Room 1 Chair: Andre de Haan, Delft University of Technology, Netherlands, The Comparison of VCHP and MVR assisted distillation of MEG-water mixture via dynamic simulations 1: TNO, 1755 ZG, Petten, the Netherlands; 2: TLK Energy GmbH, 38106 Braunschweig, Germany Vapor Recompression: An interesting option for vacuum columns? Evonik Operations, Germany Assessment of Dividing Wall Column separations - Revisit to the Vmin-diagram SINTEF, Norway Can simple side stream configurations compete with fully thermally coupled dividing wall columns? Institute of Process Systems Engineering, Hamburg University of Technology, Hamburg/Germany |
4:40pm - 5:00pm |
Coffee break2 |
|
5:00pm - 6:00pm |
Poster session A kinetic mass-transfer study of the oxidative-absorption of SO2 in H2O2 aqueous solutions 1: Department of Chemical, Materials and Production Engineering, University of Naples Federico II – P.le Tecchio 80, 80125 Naples, Italy; 2: Desmet Ballestra SpA – Via Piero Portaluppi 17 - 20138 Milan, Italy A Novel Intensified and Integrated Distillation Approach for Improving Manufacture of Propylene Glycol Monomethyl Ether Acetate 1: Yeungnam University, Korea, Republic of (South Korea); 2: Ulsan National Institute of Science and Technology, Republic of (South Korea); 3: Sogang University, Republic of (South Korea) A Novel Intensified and Integrated Distillation Approach for Improving Manufacture of Propylene Glycol Monomethyl Ether Acetate (PGMEA) Yeungnam University, Korea, Republic of (South Korea) A Simple Method for Calculating a Pitchfork Distillation Boundary Wroclaw Universty of Science and Technology, Poland Advanced marine scrubbing for simultaneous de-SOx/NOx using a wet oxidative process coupled with wash water treatment Department of Chemical, Materials and Production Engineering, University of Naples Federico II – P.le Tecchio 80, 80125 Naples, Italy An optimisation-based comparison of different dividing wall column configurations University College London (UCL), United Kingdom Analysis of a marine scrubber operation with conventional and AI based methodologies 1: The Sustainable Technologies for Pollution Control (STPC-Lab) Department of Chemical, Materials and Production Engineering, University of Naples Federico II; P.le Tecchio, 80, 80125 Naples, Italy; 2: DIMES Department, University of Calabria, Via P. Bucci cubo 42C, 87036 Rende (Cs), Italy; 3: Department of Mathematics and Physics, University of Campania Luigi Vanvitelli; Viale Lincoln, 5 - 81100 Caserta (Italy); 4: Grimaldi Euromed, Via Marchese Campodisola 13, 80133 Napoli (Italy); 5: Intensification of SeparaTion processes for the Environment and the circular Economy Lab (STEEL), Department of Chemical, Material and Industrial Production Engineering, University of Naples Federico II, P.le V. Tecchio, 80 - 80125 Napoli (ITALY) Are Deep Eutectic Solvents Feasible for Simultaneous Capture of CO2 and H2S from Natural Gas? State University of Campinas, Brazil Assessment of Deep Eutectic Solvents for Alcohol-Water Separations by Extractive Distillation Delft University of Technology, Netherlands, The Balance between steady-state design and dynamic control of four-product dividing wall columns 1: College of Information Science and Technology, Beijing University of Chemical Technology, Beijing 100029, China; 2: School of Chemical Engineering and Technology, Chemical Engineering Research Center, State Key Laboratory of Chemical Engineering, Tianjin University, Tianjin 300350, China BE-Clean: P2X technology for gas desulphurization 1: CERE, Dept. Chem. Biochem. Eng., Tech. Univ. Denmark; 2: PROSYS, Dept. Chem. Biochem. Eng., Tech. Univ. Denmark CFD simulation and additive manufacturing as a combined tool for the development of innovative structured packings on a laboratory scale 1: Technical University of Munich, Germany; 2: Ulm University, Germany; 3: BASF SE, Germany CO2 CAPTURE USING ADSORBENTS BASED ON SUPPORTED IMINES Catalysis and Separation Processes group (CyPS), Complutense University of Madrid CO2 freezing in low-temperature distillation of natural gas–carbon dioxide mixtures University of Manchester, United Kingdom Comparative assessment of solvent-based post-combustion capture processes for waste-to-energy ETH Zurich, Switzerland Conducting Distillative Separation Efficiency Measurements with Elevated Feed Viscosities TU Braunschweig, Germany Controllability of pilot multiple dividing wall column for various feed compositions 1: University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia; 2: Ulm University, Institute of Chemical Engineering, Ulm, Germany Controllability study of a dual condenser four product DWC 1: University of Zagreb, Faculty of Chemical Engineering and Technology, Croatia; 2: SINTEF, Norway; 3: Retired Cyrene and derivatives of cyrene as biobased entrainers in extractive distillation University of Twente, The Netherlands Design of a Novel Process for CO2 Capture Using Deep Eutectic Liquids 1: Universidad de Guanajuato, Mexico; 2: Universidad Michoacana de san Nicolas de Hidalgo, Mexico Design of Intensified processes separation to recover Furfural and coproducts Economic, Environmental, Safety and Control evaluation. Universidad de Guanajuato, Mexico Design of membrane based gas-liquid absorption units: a fast, efficient, high throughput batch to continuous methodology Laboratoire Réactions et Génie des Procédés, Université de Lorraine, CNRS, LRGP, Nancy Direct and fully automated shortcut method for designing an extractive dividing wall column: 1. Minimum azeotropic Mixtures with a Heavy Entrainer 1: Laboratoire de Génie Chimique et de Catalyse Hétérogène, Université de Science et de la Technologie – Mohamed Boudiaf, Oran, Algérie; 2: Université de Toulouse, INP, UPS, LGC (Laboratoire de Génie Chimique), 4 allée Emile Monso, F-31432 Cedex 04 Toulouse, France; 3: CNRS, LGC (Laboratoire de Génie Chimique), F-31432 Cedex 04 Toulouse, France; 4: UST. Oran, Laboratoire de chimie physique de matériaux, catalyse et environnement, Oran, Algeria Downstream processing of dimethyl ether synthesized from biogas with a hydrogen-enhanced reaction TU Clausthal, Germany Dynamic behavior of thermosyphon-assisted falling film distillation column Federal University of Santa Catarina, Brazil Energy and Control Analysis in Intensified Schemes for Acetone Purification 1: Universidad de Guanajuato, Mexico; 2: Universidad Nacional de Colombia-Manizalez Energy saving potential of dividing wall columns identified by NQ-curves 1: Ulm University, Germany; 2: Fraunhofer Institute for Industrial Mathematics ITWM, Germany Enhancing the SO2 removal efficiency of a spray tower using electrified water droplets 1: The Sustainable Technologies for Pollution Control Lab, Department of Chemical, Material and Industrial Production Engineering, University of Naples Federico II, Piazzale V. Tecchio 80, 80125 Napoli, Italy; 2: Department of Engineering, University of Campania “L. Vanvitelli”, Via Roma 29, 81031 Aversa (Caserta), Italy Entrainer selection for extractive distillation using the Infinitely Sharp Split method 1: Laboratory of Agro-Industrial Chemistry, France; 2: PROSYS, Department of Chemical and Biochemical Engineering, Denmark; 3: Chemical Engineering Laboratory, France EVALUATION OF CHEMICAL ABSORPTION AND SOLVENT REGENERATION FOR CO2 CAPTURE FROM FLUE GASES WITH DIFFERENT DESIGN CONFIGURATIONS State University of Campinas, Brazil Exergy analysis of a Top Heat-Integrated Distillation Columns (T-HIDiC) for Propylene-Propane system 1: Universidad Nacional de Colombia, Colombia; 2: Universidad de Antioquia, Colombia; 3: Université de Strasbourg, France Intensification of CO2 Capture from Methane-rich Streams Using a Rotating Packed Bed Absorption Column 1: Federal University of Bahia (UFBA), Brazil; 2: Technische Universität Berlin, D-10623 Berlin, Germany Integrated entrainer design for extractive distillation using the infinitely sharp splits method and computer-aided molecular design 1: Department of Chemical and Biochemical Engineering, Technical University of Denmark, Denmark; 2: Laboratoire de Chimie Agro-industrielle, LCA, Université de Toulouse, INRA, Toulouse, France; 3: Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INP, UPS, Toulouse, France Influence of the Size of Prefractionator on Processing Capacity for Two-Column Batch Distillation Processes Budapest University of Technology and Economics, Department of Building Services and Process Engineering, Hungary Influence of dividing wall position on performance of dividing wall column with vapor feed Tianjin University, China, People's Republic of Industrial experience in using cyclic distillation for the purification of ethanol food grade University of Manchester, United Kingdom Improving Design and Scale-up of Columns with Structured Packings by Means of CFD Technical University of Munich, Department of Mechanical Engineering, Institute of Plant and Process Technology, Garching/Germany Hydraulic investigations of the operating limits of high performance trays Technical University of Munich, Germany Gas absorption performance and stability of fine bubbles in seawater and saline solutions 1: Technical University of Munich, Germany; 2: Universidad de Guanajuato; 3: Kyoto Univeristy, Japan Further development of the guideline for standardized characterization measurements of packed columns Montanuniversität Leoben, Austria Flow morphology of TEG desiccant in a structured packing air dehumidifier exposed to floating conditions 1: Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics, 01328 Dresden, Germany; 2: Paderborn University, Faculty of Mechanical Engineering, Chair of Fluid Process Engineering, D-33098 Paderborn, Germany; 3: TU Dresden, Institute of Power Engineering, Chair of Imaging Techniques in Energy and Process Engineering, 01062 Dresden, Germany Flashing feed and mist eliminator performance at critical fluid properties 1: Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics, Bautzner Landstraße 400, 01328 Dresden, Germany.; 2: Linde GmbH, Engineering Division, Dr.-Carl-von-Linde Straße 6–14, 82049 Pullach, Germany; 3: Technische Universität Dresden, Chair of Imaging Techniques in Energy and Process Engineering, 01062 Dresden, Germany Experimental studies on the fluid dynamics of a miniaturized measuring cell for an improved design procedure of distillation columns Ruhr-Universität Bochum, Germany Experimental investigations on the fluid-dynamic design of high-performance separating trays based on a miniaturized measuring cell Ruhr-University Bochum, Germany Experimental Investigations of Fluid Dynamics of Gravity-destabilized Liquid Film Flows over Structured Surfaces Using Light Induced Fluorescence Technische Universität Berlin, Germany Experimental Investigation of the Impact of Physico-chemical Properties on Liquid Films Flow Over Flat and Corrugated Surfaces. Laboratoire de génie chimique de Toulouse, France Experimental Investigation of the Impact of Physico-chemical Properties on Liquid Film Flow Over Flat and Corrugated Surfaces. 1: Laboratoire de génie chimique de Toulouse,France; 2: IFP Energies Nouvelles, Solaize, France Experimental characterization of an innovative separation tray with enhanced flexibility Ruhr University Bochum, Germany Exergy analysis of a Top Heat-Integrated Distillation Columns (T-HIDiC) for Propylene-Propane system 1: Universidad Nacional de Colombia, Colombia; 2: Université de Strasbourg, France; 3: Universidad de Antioquia, Colombia Intensified extractive distillation process for the separation of Acetone/Methanol mixture using the ionic liquid 1-Allyl-3-Methylimidazolium Bromide University of Sciences and Technology of Oran Mohamed Boudiaf, Algeria Rapid method for prediction of random packing performance based on minimized experimental efforts ENVIMAC Engineering GmbH, Germany Investigations on thermosiphon reboiling using foaming liquid mixtures Technische Universität Braunschweig, Germany PREDICTING PRESSURE DROP OF ADVANCED WIRE GAUZE CORRUGATED SHEET STRUCTURED PACKINGS FOR DEEP VACUUM APPLICATIONS 1: Retired, The Hague, The Netherlands; 2: Technische Universität Berlin, Straße des 17. Juni 135, 10136 Berlin, Germany Parallel column model for Reactive Dividing Wall Column simulation Clarkson University, United States of America Optimizing Mass Transfer for Post Combustion Carbon Capture 1: Sulzer Chemtech AG, Switzerland; 2: Shell Technology Centre Bangalore, India Optimisation of the Dehydration of Isopropanol by Batch Heteroazeotropic Distillation with Off-cut Recycling Budapest University of Technology and Economics, Hungary, Faculty of Mechanical Engineering, Department of Building Service and Process Engineering Optimal design and operation of hybrid distillation/pervaporation processes University College London (UCL), United Kingdom Optimal design and operation of flexible reactive distillation processes University College London (UCL), United Kingdom Heterogeneous Azeotropic Separation with Intermediate Boiling Point: from Thermodynamic Analysis to Process Design University of Chinese Academy of Sciences, China, People's Republic of Performances of an advanced Y-type structured packing produced by 3D foam-printing for packed towers in FGD process intensification Department of Chemical, Materials and Production Engineering, University of Naples Federico II – P.le Tecchio 80, 80125 Naples, Italy A feasible divided wall column process for the purification of cinnamic aldehyde from Vietnam's Cinnamomum Cassia oil 1: Hanoi University of Science and Technology, Vietnam; 2: Universite de Toulouse, ENSIACET – INP de Toulouse, Laboratoire de Genie Chimique, UMR CNRS 5503, France Recovery and characterization of cellulosic ethanol from fermentation of sugarcane bagasse 1: Technical University of Denmark; 2: Goethe University Frankfurt; 3: Center on Energy Planning-State University of Campinas; 4: School of Chemical Engineering- State University of Campinas Simulation and Control of C9-C10 Aromatics Splitter Column of Bouali Sina Petrochemical Company 1: Professor, Chemical Engineering Department, University of Sistan and Baluchestan, P.O. Box 98135-674, Zahedan, Iran; 2: MSc, Chemical Engineering Department, University of Sistan and Baluchestan, P.O. Box 98135-674, Zahedan, Iran; 3: Process Dept. Bouali Sina Petrochemical Company, Site 4, Petrochemical Special Economic Zone, Bandar-e Mahshahr, Iran Simulation of a Cryogenic 13C Isotope Distillation Process Applying Different Cooling Concepts 1: Technical University of Munich; 2: Linde GmbH, Linde Engineering Simulation of eucalyptus bio-oil and Brazilian crude oils blends distillation: effects, challenges and opportunities. School of Chemical Engineering (FEQ), University of Campinas (UNICAMP), 13083-852 Campinas, Sao Paulo, Brazil Simulation of eucalyptus bio-oil and Brazilian crude oils blends distillation: effects, challenges and opportunities. Chemical Engineering Faculty - State University of Campinas (UNICAMP), Brazil Solvent selection for simultaneous separation of furans from catalytic reactor in downstream purification process National Institute of Chemistry, Slovenia Solvent Management by Oxygen Removal in Amine based Post Combustion CO2 Capture TNO, Netherlands, The Study of a Supported Enzymatic Reactive Distillation using 3-D printed internals 1: CP2M, UMR 5128, Université Claude Bernard Lyon 1, CNRS, CPE Lyon, Villeurbanne, France; 2: UMRT BioEcoAgro 1158, Equipe Biotranformation/Enzymes et Biocatalyse, Univ Lille, INRAE, Univ Liège, UPJV, JUNIA, Univ Artois, Univ Littoral côté d’Opale, ICV – Institut Charles Violette, G-59000 Lille, France; 3: LGC, UMR 5503 Université de Toulouse, CNRS, INPT, UPS, Toulouse, France Study of axial dispersion on several modern structured and random packings University of Chemistry and Technology, Prague, Czech Republic Study of the Pressure Drop and Flooding in a Rotating Packed Bed Equipped with Stainless Steel Wire-Mesh Packing 1: Laboratoire de Génie Chimique - Toulouse, France; 2: Usmanu Danfodiyo University Sokoto, Nigeria Synthesis of Alternative Intensified Sequences for the Separation of a Multicomponent Renewable Hydrocarbons Mixture 1: Universidad de Guanajuato, México; 2: Universidad Autónoma de Querétaro, México Synthesis of Double Dividing Wall Distillation Systems for the Separation of Quaternary Mixtures 1: Universidad de Guanajuato, Mexico; 2: Universidad Autónoma de Querétaro, Mexico; 3: University of Southern Denmark, Denmark The development of soft sensors for continuous estimation of the distillation 95% point of diesel product University of Zagreb, Faculty of Chemical Engineering and Technology, Croatia The Influence of Physical Properties on Structured Packing HETP Correlations 1: School of Chemical Engineering, Oklahoma State University, Stillwater, OK 74078; 2: Fractionation Research Incorporated, Stillwater, OK 74074 The new EcoMarine #2 random packing: An innovative product for flue-gas desulfurization on marine ships 1: Montanuniversität Leoben, 8700 Leoben, Austria; 2: RVT Process Equipment GmbH, 96349 Steinwiesen, Germany Towards a better understanding of wiped film evaporators - using a modular model for fluid dynamics and heat transfer TU Braunschweig, Germany Troubleshooting Liquid Side Draw-off Trays Sulzer Chemtech Using thermography for visualisation of liquid surface activity in mass-transfer processes University of Chemistry and Technology, Prague, Czech Republic Wet-oxidative gas desulfurization under avoidance of solid sulfur precipitation 1: TU Berlin, Germany; 2: thyssenkrupp Industrial Solutions AG, Germany CO2 capture from syngas by absorption process using fluorinated anion ionic liquids 1: 1Laboratoire d’Ingénierie de la Sécurité Industrielle et du Développement Durable, Institut de Maintenance et de la Sécurité Industrielle, Université Oran 2, Algérie; 2: Laboratoire de chimie physique de matériaux, catalyse et environnement, Université des Sciences et de la Technologie d’Oran USTO-MB, Algérie Conceptual design of distillation process for the separation of styrene monomer from polystyrene pyrolysis oil: experiment and simulation 1: Aalto University, School of Chemical Engineering, Department of Chemical and Metallurgical Engineering, P.O. Box 11000, FI-00076 Aalto, Finland; 2: Mid Sweden University, Department of Chemical Engineering, Sundsvall, 85170, Sweden Feasibility of internal heat integrated dividing wall column separating methanol, ethanol, and isopropanol 1: Beijing University of Chemical Technology; 2: Beijing University of Chemical Technology; 3: Beijing University of Chemical Technology Find the error - Machine Learning as a Tool for Identifying Unstable Operating Points in Thermosiphon Reboilers TU Braunschweig, Germany Smooth Penalty Function Method for Rigorous Optimization of Distillation Processes Tianjin University, China, People's Republic of Investigation of liquid maldistribution in a random packed column operated as a cooling tower Technical University of Munich, Germany Investigations of crystallization fouling in columns Technical University of Munich, Department of Mechanical Engineering, Institute of Plant and Process Technology, Germany Kinetics in DEEA-MAPA-H2O-CO2 systems for the post-combustion CO2 capture by absorption-regeneration using demixing solvents University of Mons - Faculty of Engineering, Belgium Liquid Holdup Distribution in Structured-Packed Columns via Gamma-Ray Computed Tomography 1: 1940 Air Products Blvd Allentown PA 18106 USA; 2: Helmholtz-Zentrum Dresden-Rossendorf (HZDR), Germany Loading & Flooding in Mellapak Structured Packing: Radiographic & Computer-Tomographic Insights 1: Sulzer Chemtech AG, Switzerland; 2: Institute of Separation Science & Technology, Friedrich-Alexander-University Erlangen-Nürnberg, Germany Mass-transfer model for distillation columns equipped with structured packings University of Chemistry and Technology, Prague, Czech Republic Measurement of vapor-liquid equilibria of ß-damascenone and simulation of its behavior during a batch distillation 1: Université Paris-Saclay, INRAE, AgroParisTech, UMR Sayfood, 91300 Massy, France; 2: CNAM, 75003 Paris, France Measuring tray and point efficiencies in hydraulic air/water column mockups via air-stripping of isobutyl acetate in aqueous solution 1: Chair of Imaging Techniques in Energy and Process Engineering, Technische Universität Dresden, 01062 Dresden, Germany; 2: Institute of Fluid Dynamics, Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstraße 400, 01328 Dresden, Germany; 3: Department of Civil and Industrial Engineering, University of Pisa, Largo Lucio Lazzarino 2, 56126 Pisa, Italy Model based and experimental analysis of the dynamic reactive absorption loop behavior Paderborn University, Chair of Fluid Process Engineering, Paderborn/Germany Modelling of a hybrid process combining zero gravity distillation and vapour permeation Chair of Fluid Process Engineering, Paderborn University, Paderborn, Germany Mutual verification of the gas-phase volumetric mass-transfer coefficients determined in the packed absorption column University of Chemistry and Technology, Prague, Czech Republic Novel additively manufacturable structured packings developed by innovative design methods Hamburg University of Technology, Germany Novel Process for Levulinic Acid Production Using Reactive Distillation. Universidad de Guanajuato, Mexico Module-based synthesis and intensification for the Acetone-Butanol-Ethanol (ABE) mixture separation Kyoto Univeristy, Japan A More Comprehensive Formulation to Rapidly and Reliably Screen for Energy-Efficient Distillation Configurations Purdue University, United States of America |
|
6:00pm - 7:30pm |
Special event: Cocktail sponsorised by Armagnac (BNIA) |
Date: Tuesday, 20/Sept/2022 | ||
8:30am - 9:30am |
Plenary_3 Location: Room 1 Carbon Management at BASF – Technological Pathways Towards Carbon Neutrality BASF SE, Germany |
|
9:30am - 10:30am |
Topic_2_A: Modelling Simulation Control Location: Room 2 Chair: Ross Taylor, Clarkson University, United States of America Development of a pressure-driven dynamic model to study the start-up of a flexible tray column Ruhr University Bochum, Germany A numerical selection methodology for a complex periodic packing dedicated to HIDiC 1: Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INPT, UPS, Toulouse, France; 2: School of Chemical and Biomolecular Engineering, The University of Sydney, NSW, 2006, Australia |
Topic_4_A: Equipment design, technology and innovation Location: Room 1 Development of flexible, miniaturized test columns for scale-up of distillation processes using 3D-printing 1: Ulm University, Germany; 2: Technical University of Munich, Germany; 3: BASF SE, Germany Design and Conception of an Innovative Liquid Distributor for Separation Column Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INP, UPS, Toulouse, France |
10:30am - 11:00am |
Coffee break3: Sponsored by Freyssinet |
|
11:00am - 12:40pm |
Topic_2_B: Modelling Simulation Control Location: Room 2 Chair: Mirko Skiborowski, Hamburg University of Technology, Germany Study By Simulation Of The Behavior Of Aroma Compounds during Malt Whisky Distillation With A Stupfler Type Filling Column. 1: UMR 782 SayFood, AgroParisTech-INRAE, Paris-Saclay University, France; 2: Ergaster distillery. 1 av du Parc F 60400 PASSEL CFD-based investigation of the packing microstructure influence on droplet behavior and film flow Paderborn University, Germany Modeling distillation columns for practical purposes Evonik Operations GmbH, Germany Pressure-driven, dynamic modeling of distillation columns using smooth reformulations to describe startup, shutdown, and flexible operation Technische Universität Berlin, Germany |
Topic_4_B: Equipment design, technology and innovation Location: Room 1 Chair: Marc Wehrli, Sulzer Chemtech Ltd, Switzerland C3 Splitter Revamp to Improve Separation Efficiency and Capacity 1: Sulzer Chemtech, USA; 2: Sulzer Chemtech, India; 3: Sulzer Chemtech, Bahrain; 4: Retired from Sulzer USA; 5: Saudi Kayan, SABIC; 6: Global Cracker Technology, SABIC; 7: Process Safety, SABIC; 8: Engineering Science, SABIC More than just Thermodynamics, mechanical design of dividing wall columns – best practice experiences Julius Montz GmbH, Germany The Development and Applications of a New Mass Transfer Tray Device 1: Koch Engineered Solutions, United States of America; 2: Koch Engineered Solutions Limited, UK; 3: Koch Engineered Solutions, Italy Visualization of recirculation zones over a perforated plate: An optical flow technique for characterization of fluid dynamics in structured packing 1: Air Liquide Research and Development, 1 Chemin de la Porte des Loges, Les-Loges-en-Josas 78350, France; 2: LGPM, CentraleSupélec, Université Paris-Saclay, 3 rue Joliot-Curie, 91192 Gif-sur-Yvette, France; 3: EM2C, CentraleSupélec, Université Paris-Saclay, 3 rue Joliot-Curie, 91192 Gif-sur-Yvette, France |
12:40pm - 2:00pm |
lunch2 |
|
2:00pm - 3:00pm |
Plenary_4 Location: Room 1 Chair: Elisabetta Brunazzi, University of Pisa, Italy 100 Years of Distillation with Trays and Packings and Beyond 1: Raschig GmbH, Allemagne; 2: Sulzer Chemtech USA, Inc. (retired) |
|
3:00pm - 4:15pm |
Topic_2_C: Modelling Simulation Control Location: Room 2 Chair: Regina Benfer, BASF SE, Germany Rate-based Column Design – The Need to Know BASF SE, Germany Digitalization of a Coker Fractionator Using TOWER VIEW® software Koch-Glitsch, United States of America Rate-Based Column Simulation in the Complex Domain Clarkson University, United States of America |
Topic_4_C: Equipment design, technology and innovation Location: Room 1 Chair: Izak Nieuwoudt, Koch Engineered Solutions, United States of America Intensifying Modular Carbon Capture 1: Carbon Clean, 3 Valentine Place, London, SE1 8QH, U.K.; 2: School of Engineering, Newcastle University, Newcastle upon Tyne, NE1 7RU, U.K.; 3: Julius Montz GmbH, Hilden, Germany Characterization of the operating limits of a two-staged rotating packed bed TU Dortmund, Germany New temperature measurement methodology for a comprehensive understanding of rotating packed beds in distillation processes TU Berlin, Germany |
4:15pm - 4:45pm |
Coffee break4 |
|
4:45pm - 6:00pm |
Topic_2_D: Modelling Simulation Control Location: Room 2 Chair: Ville Alopaeus, Aalto Univesity, Finland Hybrid Modeling Approaches for Air Separation Unit Control Applications 1: Technical University of Munich, TUM School of Engineering and Design, Department of Energy and Process Engineering, Institute of Plant and Process Technology, Boltzmannstraße 15, 85748 Garching (Germany); 2: Linde GmbH, Linde Engineering, Dr.-Carl-von-Linde-Straße 6-14, 82049 Pullach (Germany) Numerical simulation of the two-phase flow at a single trapezoid fixed valve using a hybrid CFD approach 1: Helmholtz-Zentrum Dresden-Rossendorf, Germany; 2: Technische Universität Dresden, Germany Opimisation of a Batch Distillation Process by Applying Surrogate Models Budapest University of Technology and Economics, Department of Building Services and Process Engineering, Hungary |
Topic_4_D: Equipment design, technology and innovation Location: Room 1 Chair: Mohammad Kalbassi, Brunel University London, United Kingdom Recent developments in separation equipment for very large distillation and absorption towers Sulzer, Switzerland High Pressure CO2 Distillation Columns with Structured Packing – from Concept to Successful Column Operation Linde Engineering / Linde GmbH, Germany Why NOT Structured Packings in High-Pressure Distillation Applications? 1: Independent Consultant; 2: Fractionation Research, Inc., United States of America |
7:30pm - 11:00pm |
Gala dinner: Sponsored by Sulzer Hôtel Dieu - Rue Viguerie TOULOUSE |
Date: Wednesday, 21/Sept/2022 | ||
8:30am - 9:30am |
Plenary_5 Location: Room 1 Chair: Igor Dejanovic, University of Zagreb, Faculty of Chemical Engineering and Technology, Croatia From 2 tons per hour to 2 tons per second of oxygen Air Liquide, France |
|
9:30am - 10:30am |
Topic_1_A: Basic Data Location: Room 1 Chair: Ljudmila Fele Zilnik, National Institute of Chemistry, Slovenia Entrainer selection for the extractive distillation of acrylic acid and propionic acid University of Twente Carbon dioxide capture with choline-based DESs solvents LABORATOIRE DE SÉCURITÉ DES PROCÉDÉS CHIMIQUES, France |
Topic_3_A: Hybrid and multifunctional processes Location: Room 2 Chair: Oleg Pajalic, Perstorp AB, Sweden High-level decision-making approach for early assessment of the applicability of advanced reactive distillation technologies University of Manchester, United Kingdom Upscale of reactive-transport phenomena in catalytic distillation units 1: CONACYT-CIATEC A.C., Centro de Innovación Aplicada en Tecnologías Competitivas; 2: Department of Chemical Engineering University of Guanajuato |
10:30am - 11:00am |
Coffee break5: Sponsored by FRI |
|
11:00am - 12:00pm |
Topic_1_B: Basic Data Location: Room 1 Chair: Jens Abildskov, Technical University of Denmark, Denmark The unexpected weirdness of rate-based simulation of some high-pressure column operations Clarkson University, United States of America Thermographical determination of the effective mass transfer area of distillation University of Chemistry and Technology, Prague, Czech Republic Measuring local condensation heat transfer coefficients in cryogenic conditions. 1: Air Liquide Research and Development, 1 Chemin de la Porte des Loges, Les-Loges-en-Josas 78350, France; 2: Lafset - Laboratoire du froid et des systèmes énergétiques et thermiques, CNAM, Paris |
Topic_3_B: Hybrid and multifunctional processes Location: Room 2 Chair: Boelo Schuur, University of Twente, Netherlands, The Investigation of an innovative control method for cyclic operation of reactive distillation columns 1: Technical University of Berlin; 2: Augsburg University of Applied Sciences; 3: ASG Analytik-Service AG Black liquor valorization via reactive distillation and heterogeneous catalysis CP2M (Catalyse, Polymérisation, Procédés et Matériaux), France Optimal design of hybrid dividing wall columns for azeotropic separations University College London (UCL) |
12:00pm - 12:40pm |
PhD Award: Sponsored by BASF |
|
12:40pm - 1:00pm |
Closure ceremony |
|
1:00pm - 2:00pm |
lunch3 |