JavaScript is Disabled
Your browser's JavaScript functionality is disabled. It has to be enabled to use this function of ConfTool.
Here you can find information on how to enable JavaScript
If you have any problems, please contact the organizers at da2022@toulouse-inp.fr.

Index of Authors

A list of all persons who contribute to the sessions of this conference. Please select a letter below to list all persons with the corresponding surname. Select the presentation in the right-hand column to access session and presentation details.

List by Initial Letter: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Á Č Š All Authors

List Options: Authors and Sessions · Authors and Sessions (Short Titles) · Authors and Presentations

Author(s)	Organization(s)	Contribution Title
Abdollahi, Mohammad	Process Dept. Bouali Sina Petrochemical Company, Site 4, Petrochemical Special Economic Zone, Bandar-e Mahshahr, Iran	Simulation and Control of C9-C10 Aromatics Splitter Column of Bouali Sina Petrochemical Company
Abildskov, Jens	PROSYS, Dept. Chem. Biochem. Eng., Tech. Univ. Denmark; Department of Chemical and Biochemical Engineering, Technical University of Denmark, Denmark	BE-Clean: P2X technology for gas desulphurization Digitalization of a Periodic Stripper Unit for Real-Time Data Integration with Predictive Modelling Entrainer selection for extractive distillation using the Infinitely Sharp Split method Integrated entrainer design for extractive distillation using the infinitely sharp splits method and computer-aided molecular design
Adami, Momme	Institute of Process Systems Engineering, Hamburg University of Technology, Hamburg/Germany	Can simple side stream configurations compete with fully thermally coupled dividing wall columns? Presenter
Adnan, Nuradibah Binti	University of Manchester, United Kingdom	CO2 freezing in low-temperature distillation of natural gas–carbon dioxide mixtures Presenter
Agrawal, Rakesh	Purdue University, United States of America	A More Comprehensive Formulation to Rapidly and Reliably Screen for Energy-Efficient Distillation Configurations Presenter
Águeda Maté, V. Ismael	Catalysis and Separation Processes group (CyPS), Complutense University of Madrid	CO2 CAPTURE USING ADSORBENTS BASED ON SUPPORTED IMINES
Aichele, Clint	School of Chemical Engineering, Oklahoma State University, Stillwater, OK 74078	The Influence of Physical Properties on Structured Packing HETP Correlations
Al Ghamdi, Misfer	Process Safety, SABIC	C3 Splitter Revamp to Improve Separation Efficiency and Capacity
AL SAYEGH, Mohamad	Laboratoire de génie chimique de Toulouse,France; IFP Energies Nouvelles, Solaize, France	Experimental Investigation of the Impact of Physico-chemical Properties on Liquid Film Flow Over Flat and Corrugated Surfaces. Presenter Experimental Investigation of the Impact of Physico-chemical Properties on Liquid Films Flow Over Flat and Corrugated Surfaces. Presenter
Al-Maqaleh, Yousef	Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INPT, UPS, Toulouse, France	A numerical selection methodology for a complex periodic packing dedicated to HIDiC Presenter
Al-Sekhan, Mohammed Ali	Global Cracker Technology, SABIC	C3 Splitter Revamp to Improve Separation Efficiency and Capacity
Alcantara Avila, J. Rafael	Kyoto Univeristy, Japan	Gas absorption performance and stability of fine bubbles in seawater and saline solutions Module-based synthesis and intensification for the Acetone-Butanol-Ethanol (ABE) mixture separation Presenter
Alcocer-Garcia, Heriberto	Universidad de Guanajuato, Mexico	Energy and Control Analysis in Intensified Schemes for Acetone Purification
Alcocer-García, Heriberto	Universidad de Guanajuato, Mexico	Novel Process for Levulinic Acid Production Using Reactive Distillation.
Alekseev, Alexander	Technical University of Munich; Linde GmbH, Linde Engineering	Simulation of a Cryogenic 13C Isotope Distillation Process Applying Different Cooling Concepts
ALIX, Pascal	IFP Energies Nouvelles, Solaize, France	Experimental Investigation of the Impact of Physico-chemical Properties on Liquid Film Flow Over Flat and Corrugated Surfaces.
Alopaeus, Ville	Aalto University, School of Chemical Engineering, Department of Chemical and Metallurgical Engineering, P.O. Box 11000, FI-00076 Aalto, Finland; Mid Sweden University, Department of Chemical Engineering, Sundsvall, 85170, Sweden	Conceptual design of distillation process for the separation of styrene monomer from polystyrene pyrolysis oil: experiment and simulation
Álvarez-Torellas, Silvia	Catalysis and Separation Processes group (CyPS), Complutense University of Madrid	CO2 CAPTURE USING ADSORBENTS BASED ON SUPPORTED IMINES
Alves, José Luiz Francisco	Federal University of Santa Catarina, Brazil	Dynamic behavior of thermosyphon-assisted falling film distillation column
Amezquita-Ortiz, Jonathan Martin	Universidad de Guanajuato, Mexico	Energy and Control Analysis in Intensified Schemes for Acetone Purification
Amjad, Riaz	Yeungnam University, Korea, Republic of (South Korea)	A Novel Intensified and Integrated Distillation Approach for Improving Manufacture of Propylene Glycol Monomethyl Ether Acetate
Appelhaus, David	TU Braunschweig, Germany	Find the error - Machine Learning as a Tool for Identifying Unstable Operating Points in Thermosiphon Reboilers Presenter Towards a better understanding of wiped film evaporators - using a modular model for fluid dynamics and heat transfer Presenter
Arlt, Wolfgang	Institute of Separation Science & Technology, Friedrich-Alexander-University Erlangen-Nürnberg, Germany	Loading & Flooding in Mellapak Structured Packing: Radiographic & Computer-Tomographic Insights
Ashour, Mohamed Adel	Ulm University, Germany	CFD simulation and additive manufacturing as a combined tool for the development of innovative structured packings on a laboratory scale Development of flexible, miniaturized test columns for scale-up of distillation processes using 3D-printing
Athès, Violaine	Université Paris-Saclay, INRAE, AgroParisTech, UMR Sayfood, 91300 Massy, France	Measurement of vapor-liquid equilibria of ß-damascenone and simulation of its behavior during a batch distillation
Bachmann, Christian	Sulzer Chemtech AG, Switzerland; Sulzer, Switzerland	Optimizing Mass Transfer for Post Combustion Carbon Capture Recent developments in separation equipment for very large distillation and absorption towers Troubleshooting Liquid Side Draw-off Trays Presenter
Bahr, David	Carbon Clean, 3 Valentine Place, London, SE1 8QH, U.K.	Intensifying Modular Carbon Capture
Bedryk, Olesja	University of Manchester, United Kingdom	Industrial experience in using cyclic distillation for the purification of ethanol food grade
Behrens, Richard	BASF SE, Germany	Rate-based Column Design – The Need to Know Presenter
Benker, Bernd	TU Clausthal, Germany	Downstream processing of dimethyl ether synthesized from biogas with a hydrogen-enhanced reaction
Benyounes, Hassiba	UST. Oran, Laboratoire de chimie physique de matériaux, catalyse et environnement, Oran, Algeria; University of Sciences and Technology of Oran Mohamed Boudiaf, Algeria	Direct and fully automated shortcut method for designing an extractive dividing wall column: 1. Minimum azeotropic Mixtures with a Heavy Entrainer Intensified extractive distillation process for the separation of Acetone/Methanol mixture using the ionic liquid 1-Allyl-3-Methylimidazolium Bromide
Berger, Alan	1940 Air Products Blvd Allentown PA 18106 USA	Liquid Holdup Distribution in Structured-Packed Columns via Gamma-Ray Computed Tomography Presenter
Bieberle, André	Helmholtz-Zentrum Dresden-Rossendorf (HZDR), Germany	Liquid Holdup Distribution in Structured-Packed Columns via Gamma-Ray Computed Tomography
BLANCO, Jean-Francois	Universite de Toulouse, ENSIACET – INP de Toulouse, Laboratoire de Genie Chimique, UMR CNRS 5503, France	A feasible divided wall column process for the purification of cinnamic aldehyde from Vietnam's Cinnamomum Cassia oil
Blum, Nicolas	Technical University of Munich, TUM School of Engineering and Design, Department of Energy and Process Engineering, Institute of Plant and Process Technology, Boltzmannstraße 15, 85748 Garching (Germany); Linde GmbH, Linde Engineering, Dr.-Carl-von-Linde-Straße 6-14, 82049 Pullach (Germany)	Hybrid Modeling Approaches for Air Separation Unit Control Applications
Bock, Jorrit	University of Twente, The Netherlands	Cyrene and derivatives of cyrene as biobased entrainers in extractive distillation
Bogatykh, Innokentij	Technical University of Berlin	Investigation of an innovative control method for cyclic operation of reactive distillation columns Presenter
Bolf, Nenad	University of Zagreb, Faculty of Chemical Engineering and Technology, Croatia	The development of soft sensors for continuous estimation of the distillation 95% point of diesel product Presenter
Borgquist, Sebastian	CERE, Dept. Chem. Biochem. Eng., Tech. Univ. Denmark	BE-Clean: P2X technology for gas desulphurization Presenter
Bortz, Michael	Fraunhofer Institute for Industrial Mathematics ITWM, Germany	Energy saving potential of dividing wall columns identified by NQ-curves
Bothe, Mike	Paderborn University, Chair of Fluid Process Engineering, Paderborn/Germany	Model based and experimental analysis of the dynamic reactive absorption loop behavior Presenter
Bowadt, Soren	HaDEA, Danemark	Horizon Europe support for the European Green Deal Presenter
Bravo, Jose	Independent Consultant	Why NOT Structured Packings in High-Pressure Distillation Applications? Presenter
Breitkreuz, Christian F.	Technische Universität Kaiserslautern, Laboratory of Engineering Thermodynamics, Kaiserslautern/Germany	Reactive distillation of mixtures containing formaldehyde, methanol, water, and poly(oxymethylene) dimethyl ethers on pilot-scale
Brösigke, Georg	Technische Universität Berlin, Germany	Experimental Investigations of Fluid Dynamics of Gravity-destabilized Liquid Film Flows over Structured Surfaces Using Light Induced Fluorescence
Brouwer, Thomas	University of Twente	Entrainer selection for the extractive distillation of acrylic acid and propionic acid Cyrene and derivatives of cyrene as biobased entrainers in extractive distillation
Brunazzi, Elisabetta	Department of Civil and Industrial Engineering, University of Pisa, Largo Lucio Lazzarino 2, 56126 Pisa, Italy	Measuring tray and point efficiencies in hydraulic air/water column mockups via air-stripping of isobutyl acetate in aqueous solution
Bruns, Bastian	Ruhr University Bochum, Germany	Development of a pressure-driven dynamic model to study the start-up of a flexible tray column
Bruschi, Larissa Thaís	State University of Campinas, Brazil	Are Deep Eutectic Solvents Feasible for Simultaneous Capture of CO2 and H2S from Natural Gas? EVALUATION OF CHEMICAL ABSORPTION AND SOLVENT REGENERATION FOR CO2 CAPTURE FROM FLUE GASES WITH DIFFERENT DESIGN CONFIGURATIONS
Bullock, Liam	Geociencias Barcelona	Carbon Dioxide Removal from the atmosphere by weathering minerals in a gas-liquid-solid contactor.
Bunaiyan, Ahmad	Saudi Aramco, Saudi Arabia	Root Cause Analysis for Structured Packing Failure (Case Study) Presenter
Burger, Jakob	Technical University of Munich, Laboratory of Chemical Process Engineering, Straubing/Germany	Reactive distillation of mixtures containing formaldehyde, methanol, water, and poly(oxymethylene) dimethyl ethers on pilot-scale
Cabrera Ruiz, Julián	Universidad de Guanajuato	Gas absorption performance and stability of fine bubbles in seawater and saline solutions
Cai, Tony	Fractionation Research Incorporated, Stillwater, OK 74074; Fractionation Research, Inc., United States of America	The Influence of Physical Properties on Structured Packing HETP Correlations Why NOT Structured Packings in High-Pressure Distillation Applications?
Campanile, Lelio	Department of Mathematics and Physics, University of Campania Luigi Vanvitelli; Viale Lincoln, 5 - 81100 Caserta (Italy)	Analysis of a marine scrubber operation with conventional and AI based methodologies
CAO, Hong-Ha	Hanoi University of Science and Technology, Vietnam	A feasible divided wall column process for the purification of cinnamic aldehyde from Vietnam's Cinnamomum Cassia oil
Carotenuto, Claudia	Department of Engineering, University of Campania “L. Vanvitelli”, Via Roma 29, 81031 Aversa (Caserta), Italy	Enhancing the SO2 removal efficiency of a spray tower using electrified water droplets
Casalinho, Joel	LGPM, CentraleSupélec, Université Paris-Saclay, 3 rue Joliot-Curie, 91192 Gif-sur-Yvette, France	Visualization of recirculation zones over a perforated plate: An optical flow technique for characterization of fluid dynamics in structured packing
Castel, Christophe	Laboratoire Réactions et Génie des Procédés, Université de Lorraine, CNRS, LRGP, Nancy	Design of membrane based gas-liquid absorption units: a fast, efficient, high throughput batch to continuous methodology
Chalakova, Mariyana	Linde Engineering / Linde GmbH, Germany	High Pressure CO2 Distillation Columns with Structured Packing – from Concept to Successful Column Operation
Chaniago, Yus Donald	Ulsan National Institute of Science and Technology, Republic of (South Korea)	A Novel Intensified and Integrated Distillation Approach for Improving Manufacture of Propylene Glycol Monomethyl Ether Acetate
Chaussard, Nicolas	CP2M, UMR 5128, Université Claude Bernard Lyon 1, CNRS, CPE Lyon, Villeurbanne, France	Study of a Supported Enzymatic Reactive Distillation using 3-D printed internals Presenter
Chen, Haisheng	Beijing University of Chemical Technology	Feasibility of internal heat integrated dividing wall column separating methanol, ethanol, and isopropanol Presenter
Chia, Dian	University College London (UCL), United Kingdom	Optimal design and operation of hybrid distillation/pervaporation processes Presenter Optimal design of hybrid dividing wall columns for azeotropic separations
Chromik, Reiner	ENVIMAC Engineering GmbH, Germany	New aspects of modeling and operation of nitrous gas absorption in packed columns
CID, Emmanuel	Laboratoire de génie chimique de Toulouse,France	Experimental Investigation of the Impact of Physico-chemical Properties on Liquid Film Flow Over Flat and Corrugated Surfaces.
CIRIACO, Gabriela	LABORATOIRE DE SÉCURITÉ DES PROCÉDÉS CHIMIQUES, France	Carbon dioxide capture with choline-based DESs solvents Presenter
Čmelíková, Tereza	University of Chemistry and Technology, Prague, Czech Republic	Mass-transfer model for distillation columns equipped with structured packings Thermographical determination of the effective mass transfer area of distillation Mutual verification of the gas-phase volumetric mass-transfer coefficients determined in the packed absorption column Study of axial dispersion on several modern structured and random packings
COGNET, Patrick	Universite de Toulouse, ENSIACET – INP de Toulouse, Laboratoire de Genie Chimique, UMR CNRS 5503, France	A feasible divided wall column process for the purification of cinnamic aldehyde from Vietnam's Cinnamomum Cassia oil
Contreras-Zarazúa, Gabriel	Universidad de Guanajuato, Mexico	Design of Intensified processes separation to recover Furfural and coproducts Economic, Environmental, Safety and Control evaluation.
Contreras-Zarazua, Gabriel	Universidad de Guanajuato, Mexico	Energy and Control Analysis in Intensified Schemes for Acetone Purification
COSTA, Alexis	University of Mons - Faculty of Engineering, Belgium	Kinetics in DEEA-MAPA-H2O-CO2 systems for the post-combustion CO2 capture by absorption-regeneration using demixing solvents
Crayssac, Frédéric	Air Liquide Research and Development, 1 Chemin de la Porte des Loges, Les-Loges-en-Josas 78350, France	Measuring local condensation heat transfer coefficients in cryogenic conditions.
Crémieux, Marie-Adélaïde	Air Liquide Research and Development, 1 Chemin de la Porte des Loges, Les-Loges-en-Josas 78350, France	Measuring local condensation heat transfer coefficients in cryogenic conditions.
da Cunha, Sergio	Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INP, UPS, Toulouse, France	Design and Conception of an Innovative Liquid Distributor for Separation Column Presenter
Dahal, Roshi	Aalto University, School of Chemical Engineering, Department of Chemical and Metallurgical Engineering, P.O. Box 11000, FI-00076 Aalto, Finland	Conceptual design of distillation process for the separation of styrene monomer from polystyrene pyrolysis oil: experiment and simulation Presenter
Dahlhaus, Juergen	BASF SE, Germany	Carbon Management at BASF – Technological Pathways Towards Carbon Neutrality Presenter
DALMAZZONE, Christine	IFP Energies Nouvelles, Solaize, France	Experimental Investigation of the Impact of Physico-chemical Properties on Liquid Film Flow Over Flat and Corrugated Surfaces.
Darton, Richard C	University of Oxford, United Kingdom	Carbon Dioxide Removal from the atmosphere by weathering minerals in a gas-liquid-solid contactor. Presenter
de Haan, Andre	Delft University of Technology, Netherlands, The	Assessment of Deep Eutectic Solvents for Alcohol-Water Separations by Extractive Distillation Presenter
de Villiers, Ruan	Clarkson University, United States of America	Parallel column model for Reactive Dividing Wall Column simulation Presenter The unexpected weirdness of rate-based simulation of some high-pressure column operations
DE WEIRELD, Guy	University of Mons - Faculty of Engineering, Belgium	Kinetics in DEEA-MAPA-H2O-CO2 systems for the post-combustion CO2 capture by absorption-regeneration using demixing solvents
Decarpigny, Cedric	UMRT BioEcoAgro 1158, Equipe Biotranformation/Enzymes et Biocatalyse, Univ Lille, INRAE, Univ Liège, UPJV, JUNIA, Univ Artois, Univ Littoral côté d’Opale, ICV – Institut Charles Violette, G-59000 Lille, France	Study of a Supported Enzymatic Reactive Distillation using 3-D printed internals
Dechert, Christopher	Paderborn University, Germany	CFD-based investigation of the packing microstructure influence on droplet behavior and film flow Presenter
Dejanović, Igor	University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia	Controllability of pilot multiple dividing wall column for various feed compositions Controllability study of a dual condenser four product DWC Presenter
Delgado, Jose Antonio	Catalysis and Separation Processes group (CyPS), Complutense University of Madrid	CO2 CAPTURE USING ADSORBENTS BASED ON SUPPORTED IMINES
Di Bonito, Luigi Piero	Department of Mathematics and Physics, University of Campania Luigi Vanvitelli; Viale Lincoln, 5 - 81100 Caserta (Italy); Intensification of SeparaTion processes for the Environment and the circular Economy Lab (STEEL), Department of Chemical, Material and Industrial Production Engineering, University of Naples Federico II, P.le V. Tecchio, 80 - 80125 Napoli (ITALY)	Analysis of a marine scrubber operation with conventional and AI based methodologies Presenter
Di Miceli Raimondi, Nathalie	Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INPT, UPS, Toulouse, France	A numerical selection methodology for a complex periodic packing dedicated to HIDiC
Di Natale, Francesco	The Sustainable Technologies for Pollution Control (STPC-Lab) Department of Chemical, Materials and Production Engineering, University of Naples Federico II; P.le Tecchio, 80, 80125 Naples, Italy	Analysis of a marine scrubber operation with conventional and AI based methodologies Enhancing the SO2 removal efficiency of a spray tower using electrified water droplets
Di Natale, Francesco	Department of Chemical, Materials and Production Engineering, University of Naples Federico II – P.le Tecchio 80, 80125 Naples, Italy	A kinetic mass-transfer study of the oxidative-absorption of SO2 in H2O2 aqueous solutions Advanced marine scrubbing for simultaneous de-SOx/NOx using a wet oxidative process coupled with wash water treatment Performances of an advanced Y-type structured packing produced by 3D foam-printing for packed towers in FGD process intensification
Döß, Alexander	Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics, Bautzner Landstraße 400, 01328 Dresden, Germany.	Flashing feed and mist eliminator performance at critical fluid properties Presenter
Duanmu, Fanyi	University College London (UCL), United Kingdom	An optimisation-based comparison of different dividing wall column configurations Presenter Optimal design of hybrid dividing wall columns for azeotropic separations
DUBOIS, Lionel	University of Mons - Faculty of Engineering, Belgium	Kinetics in DEEA-MAPA-H2O-CO2 systems for the post-combustion CO2 capture by absorption-regeneration using demixing solvents
Duval, Hervé	LGPM, CentraleSupélec, Université Paris-Saclay, 3 rue Joliot-Curie, 91192 Gif-sur-Yvette, France	Visualization of recirculation zones over a perforated plate: An optical flow technique for characterization of fluid dynamics in structured packing
E.V. Rossell, Carlos	Center on Energy Planning-State University of Campinas	Recovery and characterization of cellulosic ethanol from fermentation of sugarcane bagasse
Eder, Simon	Institute of Separation Science & Technology, Friedrich-Alexander-University Erlangen-Nürnberg, Germany	Loading & Flooding in Mellapak Structured Packing: Radiographic & Computer-Tomographic Insights
Ehlers, Christoph	Evonik Operations GmbH, Germany	Modeling distillation columns for practical purposes Vapor Recompression: An interesting option for vacuum columns?
Ehlert, Thomas	Paderborn University, Faculty of Mechanical Engineering, Chair of Fluid Process Engineering, D-33098 Paderborn, Germany	Flow morphology of TEG desiccant in a structured packing air dehumidifier exposed to floating conditions
Engel, Felicitas Sophia	Technical University of Munich, Germany	Hydraulic investigations of the operating limits of high performance trays Presenter
Engel, Volker	WelChem Process Technology GmbH, Germany	How to calculate column hydraulics considering operational effects Presenter
Errico, Massimiliano	University of Southern Denmark, Denmark	Synthesis of Double Dividing Wall Distillation Systems for the Separation of Quaternary Mixtures
Erto, Alessandro	Department of Chemical, Materials and Production Engineering, University of Naples Federico II – P.le Tecchio 80, 80125 Naples, Italy	A kinetic mass-transfer study of the oxidative-absorption of SO2 in H2O2 aqueous solutions Advanced marine scrubbing for simultaneous de-SOx/NOx using a wet oxidative process coupled with wash water treatment Performances of an advanced Y-type structured packing produced by 3D foam-printing for packed towers in FGD process intensification
Esche, Erik	Technische Universität Berlin, D-10623 Berlin, Germany	Intensification of CO2 Capture from Methane-rich Streams Using a Rotating Packed Bed Absorption Column
Esteban-Decloux, Martine	Université Paris-Saclay, INRAE, AgroParisTech, UMR Sayfood, 91300 Massy, France; UMR 782 SayFood, AgroParisTech-INRAE, Paris-Saclay University, France	Measurement of vapor-liquid equilibria of ß-damascenone and simulation of its behavior during a batch distillation Study By Simulation Of The Behavior Of Aroma Compounds during Malt Whisky Distillation With A Stupfler Type Filling Column. Presenter
ESTEL, Lionel	LABORATOIRE DE SÉCURITÉ DES PROCÉDÉS CHIMIQUES, France	Carbon dioxide capture with choline-based DESs solvents
Fasel, Henrik	Ruhr University Bochum, Germany	Development of a pressure-driven dynamic model to study the start-up of a flexible tray column Experimental characterization of an innovative separation tray with enhanced flexibility
Favre, Eric	Laboratoire Réactions et Génie des Procédés, Université de Lorraine, CNRS, LRGP, Nancy	Design of membrane based gas-liquid absorption units: a fast, efficient, high throughput batch to continuous methodology
Fele Žilnik, Ljudmila	National Institute of Chemistry, Slovenia	Solvent selection for simultaneous separation of furans from catalytic reactor in downstream purification process Presenter
Fernandes, Daniel Santos	School of Chemical Engineering (FEQ), University of Campinas (UNICAMP), 13083-852 Campinas, Sao Paulo, Brazil; Chemical Engineering Faculty - State University of Campinas (UNICAMP), Brazil	Simulation of eucalyptus bio-oil and Brazilian crude oils blends distillation: effects, challenges and opportunities. Simulation of eucalyptus bio-oil and Brazilian crude oils blends distillation: effects, challenges and opportunities.
Ferrari, Alessandro	Koch Engineered Solutions, Italy	The Development and Applications of a New Mass Transfer Tray Device
Ferre, Alvaro	Technical University of Munich, Laboratory of Chemical Process Engineering, Straubing/Germany	Reactive distillation of mixtures containing formaldehyde, methanol, water, and poly(oxymethylene) dimethyl ethers on pilot-scale Presenter
Ferreri, Eglé	Laboratoire Réactions et Génie des Procédés, Université de Lorraine, CNRS, LRGP, Nancy	Design of membrane based gas-liquid absorption units: a fast, efficient, high throughput batch to continuous methodology Presenter
Fieg, Georg	Hamburg University of Technology, Germany	Novel additively manufacturable structured packings developed by innovative design methods
Flagiello, Domenico	Department of Chemical, Materials and Production Engineering, University of Naples Federico II – P.le Tecchio 80, 80125 Naples, Italy	A kinetic mass-transfer study of the oxidative-absorption of SO2 in H2O2 aqueous solutions Presenter Advanced marine scrubbing for simultaneous de-SOx/NOx using a wet oxidative process coupled with wash water treatment Presenter Performances of an advanced Y-type structured packing produced by 3D foam-printing for packed towers in FGD process intensification Presenter
Flegiel, Felix	Linde GmbH, Engineering Division, Dr.-Carl-von-Linde Straße 6–14, 82049 Pullach, Germany	Flashing feed and mist eliminator performance at critical fluid properties
Fletcher, David F.	School of Chemical and Biomolecular Engineering, The University of Sydney, NSW, 2006, Australia	A numerical selection methodology for a complex periodic packing dedicated to HIDiC
Flores-Flores, Monserrat	Universidad de Guanajuato, Mexico	Synthesis of Double Dividing Wall Distillation Systems for the Separation of Quaternary Mixtures
Fongarland, Pascal	CP2M, UMR 5128, Université Claude Bernard Lyon 1, CNRS, CPE Lyon, Villeurbanne, France	Study of a Supported Enzymatic Reactive Distillation using 3-D printed internals
FONGARLAND, Pascal	CP2M (Catalyse, Polymérisation, Procédés et Matériaux), France	Black liquor valorization via reactive distillation and heterogeneous catalysis
Fontalvo, Javier	Universidad Nacional de Colombia-Manizalez	Energy and Control Analysis in Intensified Schemes for Acetone Purification
Fosbøl, Philip Loldrup	CERE, Dept. Chem. Biochem. Eng., Tech. Univ. Denmark	BE-Clean: P2X technology for gas desulphurization
Franke, Patrick	ENVIMAC Engineering GmbH, Germany	New aspects of modeling and operation of nitrous gas absorption in packed columns
Fregolente, Leonardo Vasconcelos	School of Chemical Engineering (FEQ), University of Campinas (UNICAMP), 13083-852 Campinas, Sao Paulo, Brazil; Chemical Engineering Faculty - State University of Campinas (UNICAMP), Brazil	Simulation of eucalyptus bio-oil and Brazilian crude oils blends distillation: effects, challenges and opportunities. Simulation of eucalyptus bio-oil and Brazilian crude oils blends distillation: effects, challenges and opportunities. Presenter
Fritsch, Philipp	Technical University of Munich	Simulation of a Cryogenic 13C Isotope Distillation Process Applying Different Cooling Concepts Presenter
Froidevaux, Renato	UMRT BioEcoAgro 1158, Equipe Biotranformation/Enzymes et Biocatalyse, Univ Lille, INRAE, Univ Liège, UPJV, JUNIA, Univ Artois, Univ Littoral côté d’Opale, ICV – Institut Charles Violette, G-59000 Lille, France	Study of a Supported Enzymatic Reactive Distillation using 3-D printed internals
Gäbler, Ansor	Sulzer Chemtech AG, Switzerland	Loading & Flooding in Mellapak Structured Packing: Radiographic & Computer-Tomographic Insights
Gaitzsch, Friedemann	BASF SE, Germany	Rate-based Column Design – The Need to Know
GARBA, Usman	Laboratoire de Génie Chimique - Toulouse, France; Usmanu Danfodiyo University Sokoto, Nigeria	Study of the Pressure Drop and Flooding in a Rotating Packed Bed Equipped with Stainless Steel Wire-Mesh Packing Presenter
Geipel, Christian	RVT Process Equipment GmbH, 96349 Steinwiesen, Germany	The new EcoMarine #2 random packing: An innovative product for flue-gas desulfurization on marine ships
Gerbaud, Vincent	Chemical Engineering Laboratory, France; Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INP, UPS, Toulouse, France	Entrainer selection for extractive distillation using the Infinitely Sharp Split method Integrated entrainer design for extractive distillation using the infinitely sharp splits method and computer-aided molecular design Design and Conception of an Innovative Liquid Distributor for Separation Column
Gerbaud, Vincent	Université de Toulouse, INP, UPS, LGC (Laboratoire de Génie Chimique), 4 allée Emile Monso, F-31432 Cedex 04 Toulouse, France; CNRS, LGC (Laboratoire de Génie Chimique), F-31432 Cedex 04 Toulouse, France	Direct and fully automated shortcut method for designing an extractive dividing wall column: 1. Minimum azeotropic Mixtures with a Heavy Entrainer
Giampaoli, Pierre	Université Paris-Saclay, INRAE, AgroParisTech, UMR Sayfood, 91300 Massy, France	Measurement of vapor-liquid equilibria of ß-damascenone and simulation of its behavior during a batch distillation
Giraud, Florine	Lafset - Laboratoire du froid et des systèmes énergétiques et thermiques, CNAM, Paris	Measuring local condensation heat transfer coefficients in cryogenic conditions.
Gómez-Castro, Fernando Israel	Universidad de Guanajuato, México	Synthesis of Alternative Intensified Sequences for the Separation of a Multicomponent Renewable Hydrocarbons Mixture Synthesis of Double Dividing Wall Distillation Systems for the Separation of Quaternary Mixtures Presenter
Gonzalez-Campos, Betzabe	Universidad Michoacana de san Nicolas de Hidalgo, Mexico	Design of a Novel Process for CO2 Capture Using Deep Eutectic Liquids
Graber, Manuel	TLK Energy GmbH, 38106 Braunschweig, Germany	Comparison of VCHP and MVR assisted distillation of MEG-water mixture via dynamic simulations
GRANGEON, H.	Ergaster distillery. 1 av du Parc F 60400 PASSEL	Study By Simulation Of The Behavior Of Aroma Compounds during Malt Whisky Distillation With A Stupfler Type Filling Column.
Grilc, Miha	National Institute of Chemistry, Slovenia	Solvent selection for simultaneous separation of furans from catalytic reactor in downstream purification process
Groß, Kai	Julius Montz GmbH, Hilden, Germany	Intensifying Modular Carbon Capture
Gruenewald, Marcus	Ruhr-Universität Bochum, Germany	Experimental studies on the fluid dynamics of a miniaturized measuring cell for an improved design procedure of distillation columns
Grünewald, Marcus	Ruhr University Bochum, Germany	Development of a pressure-driven dynamic model to study the start-up of a flexible tray column Experimental characterization of an innovative separation tray with enhanced flexibility Experimental investigations on the fluid-dynamic design of high-performance separating trays based on a miniaturized measuring cell
Grützner, Thomas	Ulm University, Germany; Ulm University, Institute of Chemical Engineering, Ulm, Germany	CFD simulation and additive manufacturing as a combined tool for the development of innovative structured packings on a laboratory scale Controllability of pilot multiple dividing wall column for various feed compositions Development of flexible, miniaturized test columns for scale-up of distillation processes using 3D-printing Energy saving potential of dividing wall columns identified by NQ-curves First Impressions of Multiple Dividing Wall Column Operation: Design and First Experimental Results
Guella, Fadia Nouara	University of Sciences and Technology of Oran Mohamed Boudiaf, Algeria	Intensified extractive distillation process for the separation of Acetone/Methanol mixture using the ionic liquid 1-Allyl-3-Methylimidazolium Bromide Presenter
Guevara-Luna, Marco Andrés	Université de Strasbourg, France	Exergy analysis of a Top Heat-Integrated Distillation Columns (T-HIDiC) for Propylene-Propane system Exergy analysis of a Top Heat-Integrated Distillation Columns (T-HIDiC) for Propylene-Propane system
Gummala, Vijaya Bhaskar R.	Siemens AG, Germany	Troubleshooting a Column - Problem and Solution
Gutiérrez-Antonio, Claudia	Universidad Autónoma de Querétaro, México	Synthesis of Alternative Intensified Sequences for the Separation of a Multicomponent Renewable Hydrocarbons Mixture Synthesis of Double Dividing Wall Distillation Systems for the Separation of Quaternary Mixtures
Gutperl, Sven	TU Braunschweig, Germany	Conducting Distillative Separation Efficiency Measurements with Elevated Feed Viscosities Presenter
Haas, Michael	BASF SE, Germany	Rate-based Column Design – The Need to Know
Haidl, Jan	University of Chemistry and Technology, Prague, Czech Republic	Thermographical determination of the effective mass transfer area of distillation Using thermography for visualisation of liquid surface activity in mass-transfer processes
Hall, James	Carbon Clean, 3 Valentine Place, London, SE1 8QH, U.K.	Intensifying Modular Carbon Capture Presenter
Halvorsen, Ivar J.	SINTEF, Norway	Assessment of Dividing Wall Column separations - Revisit to the Vmin-diagram Presenter Controllability study of a dual condenser four product DWC
Hampel, Uwe	Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics, Bautzner Landstraße 400, 01328 Dresden, Germany.; Technische Universität Dresden, Chair of Imaging Techniques in Energy and Process Engineering, 01062 Dresden, Germany; Helmholtz-Zentrum Dresden-Rossendorf, Germany; Technische Universität Dresden, Germany	Flashing feed and mist eliminator performance at critical fluid properties Flow morphology of TEG desiccant in a structured packing air dehumidifier exposed to floating conditions Measuring tray and point efficiencies in hydraulic air/water column mockups via air-stripping of isobutyl acetate in aqueous solution Numerical simulation of the two-phase flow at a single trapezoid fixed valve using a hybrid CFD approach
Hartanto, Dhoni	Delft University of Technology, Netherlands, The	Assessment of Deep Eutectic Solvents for Alcohol-Water Separations by Extractive Distillation Assessment of Deep Eutectic Solvents for Alcohol-Water Separations by Extractive Distillation
Hasse, Hans	Technische Universität Kaiserslautern, Laboratory of Engineering Thermodynamics, Kaiserslautern/Germany	Reactive distillation of mixtures containing formaldehyde, methanol, water, and poly(oxymethylene) dimethyl ethers on pilot-scale
Hassiba, BENYOUNES	Laboratoire de chimie physique de matériaux, catalyse et environnement, Université des Sciences et de la Technologie d’Oran USTO-MB, Algérie	CO2 capture from syngas by absorption process using fluorinated anion ionic liquids
Haushofer, Georg	Montanuniversität Leoben, Austria	Automated detection of loading and flooding points in packed columns Presenter Further development of the guideline for standardized characterization measurements of packed columns
Hegely, Laszlo	Budapest University of Technology and Economics, Department of Building Services and Process Engineering, Hungary	Influence of the Size of Prefractionator on Processing Capacity for Two-Column Batch Distillation Processes Presenter Opimisation of a Batch Distillation Process by Applying Surrogate Models Presenter Optimisation of the Dehydration of Isopropanol by Batch Heteroazeotropic Distillation with Off-cut Recycling
Held, Christoph	TU Dortmund, Germany	Characterization of the operating limits of a two-staged rotating packed bed
Herceg, Srečko	University of Zagreb, Faculty of Chemical Engineering and Technology, Croatia	The development of soft sensors for continuous estimation of the distillation 95% point of diesel product
Hernández, Salvador	Universidad de Guanajuato, México	Synthesis of Alternative Intensified Sequences for the Separation of a Multicomponent Renewable Hydrocarbons Mixture
Herrera, Willian	School of Chemical Engineering- State University of Campinas	Recovery and characterization of cellulosic ethanol from fermentation of sugarcane bagasse
Hiller, Christoph	Evonik Operations GmbH, Germany	Modeling distillation columns for practical purposes
Hoffmann, Christian	Technische Universität Berlin, Germany; Technical University of Berlin	Experimental Investigations of Fluid Dynamics of Gravity-destabilized Liquid Film Flows over Structured Surfaces Using Light Induced Fluorescence Investigation of an innovative control method for cyclic operation of reactive distillation columns Pressure-driven, dynamic modeling of distillation columns using smooth reformulations to describe startup, shutdown, and flexible operation Presenter
Hojgrová, Anna	University of Chemistry and Technology, Prague, Czech Republic	Mutual verification of the gas-phase volumetric mass-transfer coefficients determined in the packed absorption column
Hölzl, Michael	Technical University of Munich	Simulation of a Cryogenic 13C Isotope Distillation Process Applying Different Cooling Concepts
Hooisma, Simon	University of Twente, The Netherlands	Cyrene and derivatives of cyrene as biobased entrainers in extractive distillation
Horsch, Anna Sophia	Institute of Process Systems Engineering, Hamburg University of Technology, Hamburg/Germany	Can simple side stream configurations compete with fully thermally coupled dividing wall columns?
Hou, Peng-Cheng	Sulzer Chemtech	Troubleshooting Liquid Side Draw-off Trays
Houghton, Patrick	1940 Air Products Blvd Allentown PA 18106 USA	Liquid Holdup Distribution in Structured-Packed Columns via Gamma-Ray Computed Tomography
Huang, Kejin	Beijing University of Chemical Technology	Feasibility of internal heat integrated dividing wall column separating methanol, ethanol, and isopropanol
Huusom, Jakob K.	Department of Chemical and Biochemical Engineering, Technical University of Denmark, Denmark	Digitalization of a Periodic Stripper Unit for Real-Time Data Integration with Predictive Modelling
Illner, Markus	Technische Universität Berlin, Germany; Technical University of Berlin; TU Berlin, Germany	Experimental Investigations of Fluid Dynamics of Gravity-destabilized Liquid Film Flows over Structured Surfaces Using Light Induced Fluorescence Intensification of CO2 Capture from Methane-rich Streams Using a Rotating Packed Bed Absorption Column Investigation of an innovative control method for cyclic operation of reactive distillation columns New temperature measurement methodology for a comprehensive understanding of rotating packed beds in distillation processes
Inderwies, Korbinian	Technical University of Munich, Department of Mechanical Engineering, Institute of Plant and Process Technology, Germany	Investigations of crystallization fouling in columns Presenter
Islam, Muhammad	Yeungnam University, Korea, Republic of (South Korea)	A Novel Intensified and Integrated Distillation Approach for Improving Manufacture of Propylene Glycol Monomethyl Ether Acetate
Iyer, Manasa	Air Liquide Research and Development, 1 Chemin de la Porte des Loges, Les-Loges-en-Josas 78350, France	Visualization of recirculation zones over a perforated plate: An optical flow technique for characterization of fluid dynamics in structured packing Presenter
Jahnke, Stefan	TU Braunschweig, Germany	Towards a better understanding of wiped film evaporators - using a modular model for fluid dynamics and heat transfer
Jalomo-Fonseca, Karla Rebeca	Universidad de Guanajuato, Mexico	Design of a Novel Process for CO2 Capture Using Deep Eutectic Liquids
Jan, Haidl	University of Chemistry and Technology, Prague, Czech Republic	Mass-transfer model for distillation columns equipped with structured packings
Jasch, Katharina	TU Braunschweig, Germany; Technische Universität Braunschweig, Germany	Conducting Distillative Separation Efficiency Measurements with Elevated Feed Viscosities Experimental investigation of foam in packed distillation columns Find the error - Machine Learning as a Tool for Identifying Unstable Operating Points in Thermosiphon Reboilers Investigations on thermosiphon reboiling using foaming liquid mixtures Towards a better understanding of wiped film evaporators - using a modular model for fluid dynamics and heat transfer
Jasso-Villegas, Miriam E.	Universidad de Guanajuato, Mexico	Design of Intensified processes separation to recover Furfural and coproducts Economic, Environmental, Safety and Control evaluation.
Jawahill, Jaeide	Clarkson University, United States of America	Rate-Based Column Simulation in the Complex Domain Presenter
Jia, Shengkun	School of Chemical Engineering and Technology, Chemical Engineering Research Center, State Key Laboratory of Chemical Engineering, Tianjin University, Tianjin 300350, China; Tianjin University, China, People's Republic of	Balance between steady-state design and dynamic control of four-product dividing wall columns Influence of dividing wall position on performance of dividing wall column with vapor feed Smooth Penalty Function Method for Rigorous Optimization of Distillation Processes
Jobson, Megan	University of Manchester, United Kingdom	CO2 freezing in low-temperature distillation of natural gas–carbon dioxide mixtures High-level decision-making approach for early assessment of the applicability of advanced reactive distillation technologies
Jouenne, Stéphane	Total Energies, France	Absorption and CO2 capture
Kale, Vinit	Sulzer Chemtech, Bahrain	C3 Splitter Revamp to Improve Separation Efficiency and Capacity
Karaman, Ömer Faruk	Budapest University of Technology and Economics, Department of Building Services and Process Engineering, Hungary	Opimisation of a Batch Distillation Process by Applying Surrogate Models
Keestra, Hilbert	University of Twente	Entrainer selection for the extractive distillation of acrylic acid and propionic acid Presenter
Kenig, Eugeny	Paderborn University, Germany; Paderborn University, Faculty of Mechanical Engineering, Chair of Fluid Process Engineering, D-33098 Paderborn, Germany	CFD-based investigation of the packing microstructure influence on droplet behavior and film flow Flow morphology of TEG desiccant in a structured packing air dehumidifier exposed to floating conditions
Kenig, Eugeny Y.	Paderborn University, Chair of Fluid Process Engineering, Paderborn/Germany	Model based and experimental analysis of the dynamic reactive absorption loop behavior Modelling of a hybrid process combining zero gravity distillation and vapour permeation
Khawdah, Mohammad Ahmad	Saudi Kayan, SABIC	C3 Splitter Revamp to Improve Separation Efficiency and Capacity
Kim, Gwang Sik	Yeungnam University, Korea, Republic of (South Korea)	A Novel Intensified and Integrated Distillation Approach for Improving Manufacture of Propylene Glycol Monomethyl Ether Acetate Presenter A Novel Intensified and Integrated Distillation Approach for Improving Manufacture of Propylene Glycol Monomethyl Ether Acetate (PGMEA) Presenter
Kiss, Anton A.	University of Manchester, United Kingdom	Industrial experience in using cyclic distillation for the purification of ethanol food grade Presenter High-level decision-making approach for early assessment of the applicability of advanced reactive distillation technologies
Klein, Harald	Technical University of Munich, Germany; Technical University of Munich, TUM School of Engineering and Design, Department of Energy and Process Engineering, Institute of Plant and Process Technology, Boltzmannstraße 15, 85748 Garching (Germany)	CFD simulation and additive manufacturing as a combined tool for the development of innovative structured packings on a laboratory scale Development of flexible, miniaturized test columns for scale-up of distillation processes using 3D-printing Hybrid Modeling Approaches for Air Separation Unit Control Applications Hydraulic investigations of the operating limits of high performance trays Improving Design and Scale-up of Columns with Structured Packings by Means of CFD Investigation of liquid maldistribution in a random packed column operated as a cooling tower Investigations of crystallization fouling in columns Simulation of a Cryogenic 13C Isotope Distillation Process Applying Different Cooling Concepts
Knösche, Carsten	BASF SE, Germany	CFD simulation and additive manufacturing as a combined tool for the development of innovative structured packings on a laboratory scale Development of flexible, miniaturized test columns for scale-up of distillation processes using 3D-printing
Kohl, Katharina	TU Dortmund, Germany	Characterization of the operating limits of a two-staged rotating packed bed
Koo, Kee-Kahb	Sogang University, Republic of (South Korea)	A Novel Intensified and Integrated Distillation Approach for Improving Manufacture of Propylene Glycol Monomethyl Ether Acetate
Kooijman, Hendrik A.	Clarkson University, United States of America	Parallel column model for Reactive Dividing Wall Column simulation The unexpected weirdness of rate-based simulation of some high-pressure column operations
Koop, Jörg	TU Dortmund, Germany	Characterization of the operating limits of a two-staged rotating packed bed
Kota, Sesi Preetam	Helmholtz-Zentrum Dresden-Rossendorf, Germany	Numerical simulation of the two-phase flow at a single trapezoid fixed valve using a hybrid CFD approach
Kozachynskyi, Volodymyr	Technical University of Berlin	Investigation of an innovative control method for cyclic operation of reactive distillation columns
Krespach, Valentin	Technical University of Munich, TUM School of Engineering and Design, Department of Energy and Process Engineering, Institute of Plant and Process Technology, Boltzmannstraße 15, 85748 Garching (Germany)	Hybrid Modeling Approaches for Air Separation Unit Control Applications Presenter
Krishnamoorthy, Senthil	Sulzer Chemtech, USA	C3 Splitter Revamp to Improve Separation Efficiency and Capacity Presenter
Krolikowski, Lechoslaw	Wroclaw Universty of Science and Technology, Poland	A Simple Method for Calculating a Pitchfork Distillation Boundary Presenter
Kutzschbach, Annett	Linde Engineering / Linde GmbH, Germany	High Pressure CO2 Distillation Columns with Structured Packing – from Concept to Successful Column Operation
Lancia, Amedeo	Department of Chemical, Materials and Production Engineering, University of Naples Federico II – P.le Tecchio 80, 80125 Naples, Italy; The Sustainable Technologies for Pollution Control Lab, Department of Chemical, Material and Industrial Production Engineering, University of Naples Federico II, Piazzale V. Tecchio 80, 80125 Napoli, Italy	A kinetic mass-transfer study of the oxidative-absorption of SO2 in H2O2 aqueous solutions Advanced marine scrubbing for simultaneous de-SOx/NOx using a wet oxidative process coupled with wash water treatment Enhancing the SO2 removal efficiency of a spray tower using electrified water droplets Performances of an advanced Y-type structured packing produced by 3D foam-printing for packed towers in FGD process intensification
Lang, Peter	Budapest University of Technology and Economics, Department of Building Services and Process Engineering, Hungary	Influence of the Size of Prefractionator on Processing Capacity for Two-Column Batch Distillation Processes Opimisation of a Batch Distillation Process by Applying Surrogate Models Optimisation of the Dehydration of Isopropanol by Batch Heteroazeotropic Distillation with Off-cut Recycling Presenter
Lange, Andreas	Hamburg University of Technology, Germany	Novel additively manufacturable structured packings developed by innovative design methods Presenter
Lange, Jean-Paul	University of Twente	Entrainer selection for the extractive distillation of acrylic acid and propionic acid
Larriba Martínez, Marcos	Catalysis and Separation Processes group (CyPS), Complutense University of Madrid	CO2 CAPTURE USING ADSORBENTS BASED ON SUPPORTED IMINES
Laturkar, Shashank	Sulzer Chemtech, India	C3 Splitter Revamp to Improve Separation Efficiency and Capacity
LEDOUX, Alain	LABORATOIRE DE SÉCURITÉ DES PROCÉDÉS CHIMIQUES, France	Carbon dioxide capture with choline-based DESs solvents
Lee, Jonathan	School of Engineering, Newcastle University, Newcastle upon Tyne, NE1 7RU, U.K.	Intensifying Modular Carbon Capture
Lee, Ming Yang	Sulzer Chemtech AG, Switzerland	Optimizing Mass Transfer for Post Combustion Carbon Capture Presenter
LEE, MOONYONG	Yeungnam University, Korea, Republic of (South Korea)	A Novel Intensified and Integrated Distillation Approach for Improving Manufacture of Propylene Glycol Monomethyl Ether Acetate (PGMEA) A Novel Intensified and Integrated Distillation Approach for Improving Manufacture of Propylene Glycol Monomethyl Ether Acetate
Lee, SiangHua	Sulzer Chemtech	Troubleshooting Liquid Side Draw-off Trays
Lehner, Markus	Montanuniversität Leoben, Austria	Further development of the guideline for standardized characterization measurements of packed columns
Leushacke, Wibke	Ruhr-University Bochum, Germany	Experimental investigations on the fluid-dynamic design of high-performance separating trays based on a miniaturized measuring cell Presenter Experimental studies on the fluid dynamics of a miniaturized measuring cell for an improved design procedure of distillation columns
Li, Lin	University of Chinese Academy of Sciences, China, People's Republic of	Heterogeneous Azeotropic Separation with Intermediate Boiling Point: from Thermodynamic Analysis to Process Design
Li, Zengxi	University of Chinese Academy of Sciences, China, People's Republic of	Heterogeneous Azeotropic Separation with Intermediate Boiling Point: from Thermodynamic Analysis to Process Design
Likozar, Blaž	National Institute of Chemistry, Slovenia	Solvent selection for simultaneous separation of furans from catalytic reactor in downstream purification process
Linder, Thomas	Sulzer Chemtech AG, Switzerland	Loading & Flooding in Mellapak Structured Packing: Radiographic & Computer-Tomographic Insights Presenter
Lindermeir, Andreas	TU Clausthal, Germany	Downstream processing of dimethyl ether synthesized from biogas with a hydrogen-enhanced reaction
Liu, Huiying	Tianjin University, China, People's Republic of	Influence of dividing wall position on performance of dividing wall column with vapor feed
Liu, Xingwei	Tianjin University, China, People's Republic of	Smooth Penalty Function Method for Rigorous Optimization of Distillation Processes Presenter
Löw, Sebastian	Nobian GmbH, Germany	Troubleshooting a Column - Problem and Solution Presenter
Lucke, Martin	SULZER CHEMTECH AG, Switzerland	Development of a novel industrial process for stripping of carbon dioxide and ammonia from bioprocess wastewater
Luevano, Oscar	CONACYT-CIATEC A.C., Centro de Innovación Aplicada en Tecnologías Competitivas	Upscale of reactive-transport phenomena in catalytic distillation units Presenter
Lukač, Goran	University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia	Controllability of pilot multiple dividing wall column for various feed compositions Presenter Controllability study of a dual condenser four product DWC
Luo, Yiqing	Tianjin University, China, People's Republic of	Influence of dividing wall position on performance of dividing wall column with vapor feed Smooth Penalty Function Method for Rigorous Optimization of Distillation Processes
Lutters, Nicole	Paderborn University, Chair of Fluid Process Engineering, Paderborn/Germany	Model based and experimental analysis of the dynamic reactive absorption loop behavior
Machado, Ricardo Antonio Francisco	Federal University of Santa Catarina, Brazil	Dynamic behavior of thermosyphon-assisted falling film distillation column
Maciel, Maria Regina Wolf	School of Chemical Engineering (FEQ), University of Campinas (UNICAMP), 13083-852 Campinas, Sao Paulo, Brazil; Chemical Engineering Faculty - State University of Campinas (UNICAMP), Brazil	Simulation of eucalyptus bio-oil and Brazilian crude oils blends distillation: effects, challenges and opportunities. Presenter Simulation of eucalyptus bio-oil and Brazilian crude oils blends distillation: effects, challenges and opportunities.
Maciel Filho, Rubens	School of Chemical Engineering- State University of Campinas	Recovery and characterization of cellulosic ethanol from fermentation of sugarcane bagasse Presenter
Maciel Filho, Rubens	State University of Campinas, Brazil	Are Deep Eutectic Solvents Feasible for Simultaneous Capture of CO2 and H2S from Natural Gas? EVALUATION OF CHEMICAL ABSORPTION AND SOLVENT REGENERATION FOR CO2 CAPTURE FROM FLUE GASES WITH DIFFERENT DESIGN CONFIGURATIONS
Maćkowiak, Jan F.	ENVIMAC Engineering GmbH, Germany	New aspects of modeling and operation of nitrous gas absorption in packed columns Presenter
Maćkowiak, Jerzy	ENVIMAC Engineering GmbH, Germany	New aspects of modeling and operation of nitrous gas absorption in packed columns Rapid method for prediction of random packing performance based on minimized experimental efforts Presenter
Maffettone, Pier Luca	Department of Chemical, Materials and Production Engineering, University of Naples Federico II – P.le Tecchio 80, 80125 Naples, Italy	Performances of an advanced Y-type structured packing produced by 3D foam-printing for packed towers in FGD process intensification
Maleta, Vladimir	University of Manchester, United Kingdom	Industrial experience in using cyclic distillation for the purification of ethanol food grade
Mamedov, Tural	Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics, 01328 Dresden, Germany	Flow morphology of TEG desiccant in a structured packing air dehumidifier exposed to floating conditions Presenter
Mancera, Javier	Universidad Nacional de Colombia, Colombia	Exergy analysis of a Top Heat-Integrated Distillation Columns (T-HIDiC) for Propylene-Propane system Presenter
Mancera-Apolinar, Javier	Universidad Nacional de Colombia, Colombia	Exergy analysis of a Top Heat-Integrated Distillation Columns (T-HIDiC) for Propylene-Propane system Presenter
Marangoni, Cintia	Federal University of Santa Catarina, Brazil	Dynamic behavior of thermosyphon-assisted falling film distillation column Presenter
Marchini, Sara	Chair of Imaging Techniques in Energy and Process Engineering, Technische Universität Dresden, 01062 Dresden, Germany ; Institute of Fluid Dynamics, Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstraße 400, 01328 Dresden, Germany; Department of Civil and Industrial Engineering, University of Pisa, Largo Lucio Lazzarino 2, 56126 Pisa, Italy	Measuring tray and point efficiencies in hydraulic air/water column mockups via air-stripping of isobutyl acetate in aqueous solution Presenter
Mařík, Karel	University of Chemistry and Technology, Prague, Czech Republic	Thermographical determination of the effective mass transfer area of distillation Presenter Using thermography for visualisation of liquid surface activity in mass-transfer processes Presenter
Marina, Andrew	TNO, 1755 ZG, Petten, the Netherlands	Comparison of VCHP and MVR assisted distillation of MEG-water mixture via dynamic simulations
Martín Martínez, María	Catalysis and Separation Processes group (CyPS), Complutense University of Madrid	CO2 CAPTURE USING ADSORBENTS BASED ON SUPPORTED IMINES
Martinez-Riascos, Carlos Arturo	Universidad Nacional de Colombia, Colombia	Exergy analysis of a Top Heat-Integrated Distillation Columns (T-HIDiC) for Propylene-Propane system Exergy analysis of a Top Heat-Integrated Distillation Columns (T-HIDiC) for Propylene-Propane system
Mathew, Tony Joseph	Purdue University, United States of America	A More Comprehensive Formulation to Rapidly and Reliably Screen for Energy-Efficient Distillation Configurations
Mazzotti, Marco	ETH Zurich, Switzerland	Comparative assessment of solvent-based post-combustion capture processes for waste-to-energy Development of a novel industrial process for stripping of carbon dioxide and ammonia from bioprocess wastewater
McCarley, Ken	Fractionation Research Incorporated, Stillwater, OK 74074	The Influence of Physical Properties on Structured Packing HETP Correlations
Mehringer, Christian	RVT Process Equipment GmbH, 96349 Steinwiesen, Germany	The new EcoMarine #2 random packing: An innovative product for flue-gas desulfurization on marine ships
Mendes, Delano	Federal University of Bahia (UFBA), Brazil	Intensification of CO2 Capture from Methane-rich Streams Using a Rotating Packed Bed Absorption Column
Mendes, João Gabriel	Federal University of Bahia (UFBA), Brazil	Intensification of CO2 Capture from Methane-rich Streams Using a Rotating Packed Bed Absorption Column
Mendoza, Diego Fernando	Universidad de Antioquia, Colombia	Exergy analysis of a Top Heat-Integrated Distillation Columns (T-HIDiC) for Propylene-Propane system
Mendoza-Muñoz, Diego	Universidad de Antioquia, Colombia	Exergy analysis of a Top Heat-Integrated Distillation Columns (T-HIDiC) for Propylene-Propane system
Merenov, Andrei	Engineering Science, SABIC	C3 Splitter Revamp to Improve Separation Efficiency and Capacity
Merkel, Amelie	Ruhr-Universität Bochum, Germany	Experimental studies on the fluid dynamics of a miniaturized measuring cell for an improved design procedure of distillation columns Presenter Experimental investigations on the fluid-dynamic design of high-performance separating trays based on a miniaturized measuring cell
MEYER, Michel	Universite de Toulouse, ENSIACET – INP de Toulouse, Laboratoire de Genie Chimique, UMR CNRS 5503, France; Laboratoire de génie chimique de Toulouse,France; LGC, UMR 5503 Université de Toulouse, CNRS, INPT, UPS, Toulouse, France	A feasible divided wall column process for the purification of cinnamic aldehyde from Vietnam's Cinnamomum Cassia oil Experimental Investigation of the Impact of Physico-chemical Properties on Liquid Film Flow Over Flat and Corrugated Surfaces. Study of a Supported Enzymatic Reactive Distillation using 3-D printed internals Study of the Pressure Drop and Flooding in a Rotating Packed Bed Equipped with Stainless Steel Wire-Mesh Packing A numerical selection methodology for a complex periodic packing dedicated to HIDiC Design and Conception of an Innovative Liquid Distributor for Separation Column
MEYER, Xuan-Mi	Universite de Toulouse, ENSIACET – INP de Toulouse, Laboratoire de Genie Chimique, UMR CNRS 5503, France	A feasible divided wall column process for the purification of cinnamic aldehyde from Vietnam's Cinnamomum Cassia oil
Milicia, Antonino	Desmet Ballestra SpA – Via Piero Portaluppi 17 - 20138 Milan, Italy	A kinetic mass-transfer study of the oxidative-absorption of SO2 in H2O2 aqueous solutions
Mirhosseini, Seyed Mortaza	MSc, Chemical Engineering Department, University of Sistan and Baluchestan, P.O. Box 98135-674, Zahedan, Iran	Simulation and Control of C9-C10 Aromatics Splitter Column of Bouali Sina Petrochemical Company
Mizzi, Benoit	Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INP, UPS, Toulouse, France	Design and Conception of an Innovative Liquid Distributor for Separation Column
Mohammad, Sayeed	Fractionation Research Incorporated, Stillwater, OK 74074	The Influence of Physical Properties on Structured Packing HETP Correlations
Mokhtari, Mohammad Amin	MSc, Chemical Engineering Department, University of Sistan and Baluchestan, P.O. Box 98135-674, Zahedan, Iran	Simulation and Control of C9-C10 Aromatics Splitter Column of Bouali Sina Petrochemical Company Presenter
Mora, Camilo	Universidad Nacional de Colombia, Colombia	Modeling, validation, exergy evaluation and optimization of an industrial cryogenic air distillation plant under variable demand
Mora-Garduño, Carlos Abraham	Universidad de Guanajuato, Mexico	Design of a Novel Process for CO2 Capture Using Deep Eutectic Liquids
MOUHOUBI, Seloua	University of Mons - Faculty of Engineering, Belgium	Kinetics in DEEA-MAPA-H2O-CO2 systems for the post-combustion CO2 capture by absorption-regeneration using demixing solvents
Napolitano, Erasmo Salvatore	The Sustainable Technologies for Pollution Control (STPC-Lab) Department of Chemical, Materials and Production Engineering, University of Naples Federico II; P.le Tecchio, 80, 80125 Naples, Italy; DIMES Department, University of Calabria, Via P. Bucci cubo 42C, 87036 Rende (Cs), Italy	Analysis of a marine scrubber operation with conventional and AI based methodologies
Nava, Fabrizio	Desmet Ballestra SpA – Via Piero Portaluppi 17 - 20138 Milan, Italy	A kinetic mass-transfer study of the oxidative-absorption of SO2 in H2O2 aqueous solutions
Nemeth, Bence	Budapest University of Technology and Economics, Department of Building Services and Process Engineering, Hungary	Influence of the Size of Prefractionator on Processing Capacity for Two-Column Batch Distillation Processes Optimisation of the Dehydration of Isopropanol by Batch Heteroazeotropic Distillation with Off-cut Recycling
Nesrine, AMIRI	1Laboratoire d’Ingénierie de la Sécurité Industrielle et du Développement Durable, Institut de Maintenance et de la Sécurité Industrielle, Université Oran 2, Algérie	CO2 capture from syngas by absorption process using fluorinated anion ionic liquids Presenter
Neukäufer, Johannes	Ulm University, Germany	CFD simulation and additive manufacturing as a combined tool for the development of innovative structured packings on a laboratory scale Development of flexible, miniaturized test columns for scale-up of distillation processes using 3D-printing Presenter
Neumann, Maximilian Peter	Technical University of Munich, Department of Mechanical Engineering, Institute of Plant and Process Technology, Garching/Germany	Improving Design and Scale-up of Columns with Structured Packings by Means of CFD
NGUYEN, Trung-Dung	Hanoi University of Science and Technology, Vietnam	A feasible divided wall column process for the purification of cinnamic aldehyde from Vietnam's Cinnamomum Cassia oil Presenter
Nhien, Le Cao	Yeungnam University, Korea, Republic of (South Korea)	A Novel Intensified and Integrated Distillation Approach for Improving Manufacture of Propylene Glycol Monomethyl Ether Acetate
Nielsen, Adem Rosenkvist Aouichaoui	Department of Chemical and Biochemical Engineering, Technical University of Denmark, Denmark	Integrated entrainer design for extractive distillation using the infinitely sharp splits method and computer-aided molecular design Presenter
Nieuwoudt, Izak	Koch-Glitsch, United States of America	Digitalization of a Coker Fractionator Using TOWER VIEW® software
Nikitine, Clemence	CP2M, UMR 5128, Université Claude Bernard Lyon 1, CNRS, CPE Lyon, Villeurbanne, France	Study of a Supported Enzymatic Reactive Distillation using 3-D printed internals
NIKITINE, Clémence	CP2M (Catalyse, Polymérisation, Procédés et Matériaux), France	Black liquor valorization via reactive distillation and heterogeneous catalysis
Nogaja, Akash Sanjay	Purdue University, United States of America	A More Comprehensive Formulation to Rapidly and Reliably Screen for Energy-Efficient Distillation Configurations
Novak, Uroš	National Institute of Chemistry, Slovenia	Solvent selection for simultaneous separation of furans from catalytic reactor in downstream purification process
Ohligschläger, André	Nobian GmbH, Germany	Troubleshooting a Column - Problem and Solution
Oliva-González, Isaac	Universidad de Guanajuato, México	Synthesis of Alternative Intensified Sequences for the Separation of a Multicomponent Renewable Hydrocarbons Mixture
Olujić, Žarko	Retired	Controllability study of a dual condenser four product DWC
Olujic, Zarko	Retired, The Hague, The Netherlands	PREDICTING PRESSURE DROP OF ADVANCED WIRE GAUZE CORRUGATED SHEET STRUCTURED PACKINGS FOR DEEP VACUUM APPLICATIONS
Orjuela, Alvaro	Universidad Nacional de Colombia, Colombia	Modeling, validation, exergy evaluation and optimization of an industrial cryogenic air distillation plant under variable demand Presenter
Osterland, Thomas	Augsburg University of Applied Sciences	Investigation of an innovative control method for cyclic operation of reactive distillation columns
Otgonbayar, Tuvshinjargal	ETH Zurich, Switzerland	Comparative assessment of solvent-based post-combustion capture processes for waste-to-energy Presenter Development of a novel industrial process for stripping of carbon dioxide and ammonia from bioprocess wastewater
Otto, Caroline	TU Clausthal, Germany	Downstream processing of dimethyl ether synthesized from biogas with a hydrogen-enhanced reaction Presenter
Pachón-Morales, John	Air Liquide Research and Development, 1 Chemin de la Porte des Loges, Les-Loges-en-Josas 78350, France	Visualization of recirculation zones over a perforated plate: An optical flow technique for characterization of fluid dynamics in structured packing
Padberg, Pascal	TLK Energy GmbH, 38106 Braunschweig, Germany	Comparison of VCHP and MVR assisted distillation of MEG-water mixture via dynamic simulations
Parisi, Arianna	The Sustainable Technologies for Pollution Control Lab, Department of Chemical, Material and Industrial Production Engineering, University of Naples Federico II, Piazzale V. Tecchio 80, 80125 Napoli, Italy	Enhancing the SO2 removal efficiency of a spray tower using electrified water droplets Presenter
Paschold, Jürgen	BASF SE, Germany	CFD simulation and additive manufacturing as a combined tool for the development of innovative structured packings on a laboratory scale
Paul, Niklas	Evonik Operations GmbH, Germany	Modeling distillation columns for practical purposes Vapor Recompression: An interesting option for vacuum columns?
Pazmiño-Mayorga, Isabel	University of Manchester, United Kingdom	High-level decision-making approach for early assessment of the applicability of advanced reactive distillation technologies Presenter
Pellny, Yann	TLK Energy GmbH, 38106 Braunschweig, Germany	Comparison of VCHP and MVR assisted distillation of MEG-water mixture via dynamic simulations
Pérez Calvo, José Francisco	ETH Zurich, Switzerland	Comparative assessment of solvent-based post-combustion capture processes for waste-to-energy
Pérez-Calvo, José-Francisco	SULZER CHEMTECH AG, Switzerland	Development of a novel industrial process for stripping of carbon dioxide and ammonia from bioprocess wastewater Presenter
Perschmann, André	Linde Engineering / Linde GmbH, Germany	High Pressure CO2 Distillation Columns with Structured Packing – from Concept to Successful Column Operation Presenter
PHAN, Ngoc-Quang	Hanoi University of Science and Technology, Vietnam	A feasible divided wall column process for the purification of cinnamic aldehyde from Vietnam's Cinnamomum Cassia oil
Pilling, Mark	Sulzer, Switzerland	Recent developments in separation equipment for very large distillation and absorption towers
Piña Torres, José de Jesús	Technical University of Munich, Germany	Gas absorption performance and stability of fine bubbles in seawater and saline solutions Presenter
Plate, Dominik	Ruhr-Universität Bochum, Germany	Experimental studies on the fluid dynamics of a miniaturized measuring cell for an improved design procedure of distillation columns
Pokki, Juha-Pekka	Aalto University, School of Chemical Engineering, Department of Chemical and Metallurgical Engineering, P.O. Box 11000, FI-00076 Aalto, Finland	Conceptual design of distillation process for the separation of styrene monomer from polystyrene pyrolysis oil: experiment and simulation
Ponce-Ortega, Jose Maria	Universidad Michoacana de san Nicolas de Hidalgo, Mexico	Design of a Novel Process for CO2 Capture Using Deep Eutectic Liquids
Pontes, Karen	Federal University of Bahia (UFBA), Brazil	Intensification of CO2 Capture from Methane-rich Streams Using a Rotating Packed Bed Absorption Column Presenter
Portolano, Alberto	Grimaldi Euromed, Via Marchese Campodisola 13, 80133 Napoli (Italy)	Analysis of a marine scrubber operation with conventional and AI based methodologies
Pottmann, Martin	Linde GmbH, Linde Engineering, Dr.-Carl-von-Linde-Straße 6-14, 82049 Pullach (Germany)	Hybrid Modeling Approaches for Air Separation Unit Control Applications
Praderio, Attilio	Clarkson University, United States of America	The unexpected weirdness of rate-based simulation of some high-pressure column operations
Preißinger, Ulrich	Ulm University, Institute of Chemical Engineering, Ulm, Germany	Controllability of pilot multiple dividing wall column for various feed compositions
Prokopec, Vadim	University of Chemistry and Technology, Prague, Czech Republic	Using thermography for visualisation of liquid surface activity in mass-transfer processes
Pschold, Jürgen	BASF SE, Germany	Development of flexible, miniaturized test columns for scale-up of distillation processes using 3D-printing
Pugnet, Véronique	Total Energies, France	Absorption and CO2 capture Presenter
Pyka, Tobias	TU Dortmund, Germany	Characterization of the operating limits of a two-staged rotating packed bed Presenter
Qian, Xing	College of Information Science and Technology, Beijing University of Chemical Technology, Beijing 100029, China	Balance between steady-state design and dynamic control of four-product dividing wall columns Presenter
Qiao, Qingliang	Beijing University of Chemical Technology	Feasibility of internal heat integrated dividing wall column separating methanol, ethanol, and isopropanol
Quiroz-Ramirez, Juan José	CONACYT-CIATEC A.C., Centro de Innovación Aplicada en Tecnologías Competitivas	Upscale of reactive-transport phenomena in catalytic distillation units
Raddant, Hannes	Technische Universität Berlin, Germany	Experimental Investigations of Fluid Dynamics of Gravity-destabilized Liquid Film Flows over Structured Surfaces Using Light Induced Fluorescence Presenter
Raiser, Thomas	SULZER CHEMTECH AG, Switzerland	Development of a novel industrial process for stripping of carbon dioxide and ammonia from bioprocess wastewater
Ränger, Lena-Marie	Ulm University, Germany; Ulm University, Institute of Chemical Engineering, Thermal Process Engineering	Energy saving potential of dividing wall columns identified by NQ-curves Presenter First Impressions of Multiple Dividing Wall Column Operation: Design and First Experimental Results
Rehfeldt, Sebastian	Technical University of Munich, Germany; Technical University of Munich, TUM School of Engineering and Design, Department of Energy and Process Engineering, Institute of Plant and Process Technology, Boltzmannstraße 15, 85748 Garching (Germany)	CFD simulation and additive manufacturing as a combined tool for the development of innovative structured packings on a laboratory scale Development of flexible, miniaturized test columns for scale-up of distillation processes using 3D-printing Hybrid Modeling Approaches for Air Separation Unit Control Applications Hydraulic investigations of the operating limits of high performance trays Improving Design and Scale-up of Columns with Structured Packings by Means of CFD Investigation of liquid maldistribution in a random packed column operated as a cooling tower Investigations of crystallization fouling in columns Simulation of a Cryogenic 13C Isotope Distillation Process Applying Different Cooling Concepts
Reisnerová, Martina	University of Chemistry and Technology, Prague, Czech Republic	Mutual verification of the gas-phase volumetric mass-transfer coefficients determined in the packed absorption column
Rejl, František Jonáš	University of Chemistry and Technology, Prague, Czech Republic	Mass-transfer model for distillation columns equipped with structured packings Presenter Mutual verification of the gas-phase volumetric mass-transfer coefficients determined in the packed absorption column Study of axial dispersion on several modern structured and random packings Thermographical determination of the effective mass transfer area of distillation Using thermography for visualisation of liquid surface activity in mass-transfer processes
Repke, Jens Uwe	Technische Universität Berlin, Straße des 17. Juni 135, 10136 Berlin, Germany; Technische Universität Berlin, Germany; Technical University of Berlin; TU Berlin, Germany	PREDICTING PRESSURE DROP OF ADVANCED WIRE GAUZE CORRUGATED SHEET STRUCTURED PACKINGS FOR DEEP VACUUM APPLICATIONS Experimental Investigations of Fluid Dynamics of Gravity-destabilized Liquid Film Flows over Structured Surfaces Using Light Induced Fluorescence Intensification of CO2 Capture from Methane-rich Streams Using a Rotating Packed Bed Absorption Column Investigation of an innovative control method for cyclic operation of reactive distillation columns New temperature measurement methodology for a comprehensive understanding of rotating packed beds in distillation processes Wet-oxidative gas desulfurization under avoidance of solid sulfur precipitation
Repke, Jens-Uwe	Technische Universität Berlin, Germany	Pressure-driven, dynamic modeling of distillation columns using smooth reformulations to describe startup, shutdown, and flexible operation
Ressemann, Alexander	TU Berlin, Germany	New temperature measurement methodology for a comprehensive understanding of rotating packed beds in distillation processes Presenter
REYES, Laura	CP2M (Catalyse, Polymérisation, Procédés et Matériaux), France	Black liquor valorization via reactive distillation and heterogeneous catalysis Presenter
Riese, Julia	Ruhr University Bochum, Germany	Development of a pressure-driven dynamic model to study the start-up of a flexible tray column Presenter Experimental characterization of an innovative separation tray with enhanced flexibility Presenter
Rix, Armin	Evonik Operations GmbH, Germany	Modeling distillation columns for practical purposes Vapor Recompression: An interesting option for vacuum columns? Presenter
Rodriguez-Donis, Ivonne	Laboratory of Agro-Industrial Chemistry, France; Laboratoire de Chimie Agro-industrielle, LCA, Université de Toulouse, INRA, Toulouse, France	Entrainer selection for extractive distillation using the Infinitely Sharp Split method Presenter Integrated entrainer design for extractive distillation using the infinitely sharp splits method and computer-aided molecular design
ROESLER, John	IFP Energies Nouvelles, Solaize, France	Experimental Investigation of the Impact of Physico-chemical Properties on Liquid Film Flow Over Flat and Corrugated Surfaces.
Rogalinski, Tim	Siemens AG, Germany	Troubleshooting a Column - Problem and Solution
Rojas, Sebastian	Goethe University Frankfurt	Recovery and characterization of cellulosic ethanol from fermentation of sugarcane bagasse
Romero-Garcia, Ana Gabriela	Universidad de Guanajuato, Mexico	Design of a Novel Process for CO2 Capture Using Deep Eutectic Liquids
Romero-García, Ana Gabriela	Universidad de Guanajuato, Mexico	Novel Process for Levulinic Acid Production Using Reactive Distillation.
Romero-Izquierdo, Araceli Guadalupe	Universidad Autónoma de Querétaro, Mexico	Synthesis of Double Dividing Wall Distillation Systems for the Separation of Quaternary Mixtures Synthesis of Alternative Intensified Sequences for the Separation of a Multicomponent Renewable Hydrocarbons Mixture Presenter
Rouzineau, David	Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INP, UPS, Toulouse, France	Design and Conception of an Innovative Liquid Distributor for Separation Column Experimental Investigation of the Impact of Physico-chemical Properties on Liquid Film Flow Over Flat and Corrugated Surfaces. Study of a Supported Enzymatic Reactive Distillation using 3-D printed internals Study of the Pressure Drop and Flooding in a Rotating Packed Bed Equipped with Stainless Steel Wire-Mesh Packing A numerical selection methodology for a complex periodic packing dedicated to HIDiC
Roza, Mario	Sulzer, Switzerland	Recent developments in separation equipment for very large distillation and absorption towers Presenter
S, Mahesh Kumar	Global Cracker Technology, SABIC	C3 Splitter Revamp to Improve Separation Efficiency and Capacity
Sacher, Johannes	Technische Universität Berlin, Straße des 17. Juni 135, 10136 Berlin, Germany	PREDICTING PRESSURE DROP OF ADVANCED WIRE GAUZE CORRUGATED SHEET STRUCTURED PACKINGS FOR DEEP VACUUM APPLICATIONS Presenter
Sanchez Quiñones, Carlos Alberto Augusto	Catalysis and Separation Processes group (CyPS), Complutense University of Madrid	CO2 CAPTURE USING ADSORBENTS BASED ON SUPPORTED IMINES Presenter
Sánchez-Ramírez, Eduardo	Universidad de Guanajuato, Mexico	Design of Intensified processes separation to recover Furfural and coproducts Economic, Environmental, Safety and Control evaluation. Novel Process for Levulinic Acid Production Using Reactive Distillation.
Sánchez-Ramirez, Eduardo	Department of Chemical Engineering University of Guanajuato	Upscale of reactive-transport phenomena in catalytic distillation units
Sandford, Neil	Koch Engineered Solutions, United States of America	The Development and Applications of a New Mass Transfer Tray Device Presenter
Sarajlic, Nadin	Technical University of Munich, Germany	CFD simulation and additive manufacturing as a combined tool for the development of innovative structured packings on a laboratory scale Presenter Development of flexible, miniaturized test columns for scale-up of distillation processes using 3D-printing
Saric, Marija	TNO, 1755 ZG, Petten, the Netherlands	Comparison of VCHP and MVR assisted distillation of MEG-water mixture via dynamic simulations
Saulnier, Bernard	Air Liquide, France	From 2 tons per hour to 2 tons per second of oxygen Presenter
Schembecker, Gerhard	TU Dortmund, Germany	Characterization of the operating limits of a two-staged rotating packed bed
Schlager, Marcus	Montanuniversität Leoben, Austria	Further development of the guideline for standardized characterization measurements of packed columns The new EcoMarine #2 random packing: An innovative product for flue-gas desulfurization on marine ships Presenter
Schleicher, Eckhard	Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics, Bautzner Landstraße 400, 01328 Dresden, Germany.; Helmholtz-Zentrum Dresden-Rossendorf, Germany	Flashing feed and mist eliminator performance at critical fluid properties Flow morphology of TEG desiccant in a structured packing air dehumidifier exposed to floating conditions Numerical simulation of the two-phase flow at a single trapezoid fixed valve using a hybrid CFD approach
Scholl, Stephan	TU Braunschweig, Germany; Technische Universität Braunschweig, Germany	Conducting Distillative Separation Efficiency Measurements with Elevated Feed Viscosities Experimental investigation of foam in packed distillation columns Find the error - Machine Learning as a Tool for Identifying Unstable Operating Points in Thermosiphon Reboilers Investigations on thermosiphon reboiling using foaming liquid mixtures Towards a better understanding of wiped film evaporators - using a modular model for fluid dynamics and heat transfer
Schröder, Moritz	Evonik Operations, Germany	Vapor Recompression: An interesting option for vacuum columns?
Schubert, Markus	Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics, Bautzner Landstraße 400, 01328 Dresden, Germany.; Helmholtz-Zentrum Dresden-Rossendorf (HZDR), Germany	Flashing feed and mist eliminator performance at critical fluid properties Flow morphology of TEG desiccant in a structured packing air dehumidifier exposed to floating conditions Liquid Holdup Distribution in Structured-Packed Columns via Gamma-Ray Computed Tomography Measuring tray and point efficiencies in hydraulic air/water column mockups via air-stripping of isobutyl acetate in aqueous solution Numerical simulation of the two-phase flow at a single trapezoid fixed valve using a hybrid CFD approach
Schultes, Michael	Raschig GmbH, Allemagne	100 Years of Distillation with Trays and Packings and Beyond Presenter
Schulz, Robin	Julius Montz GmbH, Hilden, Germany	Intensifying Modular Carbon Capture More than just Thermodynamics, mechanical design of dividing wall columns – best practice experiences Presenter
Schuur, Boelo	University of Twente, The Netherlands	Cyrene and derivatives of cyrene as biobased entrainers in extractive distillation Presenter Entrainer selection for the extractive distillation of acrylic acid and propionic acid
Sebastiani, Ilio	Desmet Ballestra SpA – Via Piero Portaluppi 17 - 20138 Milan, Italy	A kinetic mass-transfer study of the oxidative-absorption of SO2 in H2O2 aqueous solutions
Segovia-Hernandez, Juan Gabriel	Universidad de Guanajuato, Mexico	Design of a Novel Process for CO2 Capture Using Deep Eutectic Liquids Presenter Design of Intensified processes separation to recover Furfural and coproducts Economic, Environmental, Safety and Control evaluation. Presenter Energy and Control Analysis in Intensified Schemes for Acetone Purification Presenter Novel Process for Levulinic Acid Production Using Reactive Distillation. Presenter
Segovia-Hernández, Juan Gabriel	Department of Chemical Engineering University of Guanajuato	Upscale of reactive-transport phenomena in catalytic distillation units
Seidel, Tobias	Fraunhofer Institute for Industrial Mathematics ITWM, Germany	Energy saving potential of dividing wall columns identified by NQ-curves
SEIHOUB, Fatima Zohra	Laboratoire de Génie Chimique et de Catalyse Hétérogène, Université de Science et de la Technologie – Mohamed Boudiaf, Oran, Algérie	Direct and fully automated shortcut method for designing an extractive dividing wall column: 1. Minimum azeotropic Mixtures with a Heavy Entrainer Presenter
Seiwert, Jacopo	Air Liquide Research and Development, 1 Chemin de la Porte des Loges, Les-Loges-en-Josas 78350, France	Measuring local condensation heat transfer coefficients in cryogenic conditions. Presenter Visualization of recirculation zones over a perforated plate: An optical flow technique for characterization of fluid dynamics in structured packing
Seki, Yusaku	Kyoto Univeristy, Japan	Module-based synthesis and intensification for the Acetone-Butanol-Ethanol (ABE) mixture separation
Shahare, Dipak	Saudi Kayan, SABIC	C3 Splitter Revamp to Improve Separation Efficiency and Capacity
Shcherbakova, Nataliya	Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INP, UPS, Toulouse, France; Chemical Engineering Laboratory, France	Design and Conception of an Innovative Liquid Distributor for Separation Column Entrainer selection for extractive distillation using the Infinitely Sharp Split method
Shcherbakova, Natalya	Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INP, UPS, Toulouse, France	Integrated entrainer design for extractive distillation using the infinitely sharp splits method and computer-aided molecular design
Shen, Sha-Li	Sulzer Chemtech	Troubleshooting Liquid Side Draw-off Trays
Shevchenko, Alexander	University of Manchester, United Kingdom	Industrial experience in using cyclic distillation for the purification of ethanol food grade
Simões, Gabriel	Federal University of Bahia (UFBA), Brazil	Intensification of CO2 Capture from Methane-rich Streams Using a Rotating Packed Bed Absorption Column
Skiborowski, Mirko	Institute of Process Systems Engineering, Hamburg University of Technology, Hamburg/Germany	Can simple side stream configurations compete with fully thermally coupled dividing wall columns?
Smith, Robin	University of Manchester, United Kingdom	CO2 freezing in low-temperature distillation of natural gas–carbon dioxide mixtures
Šobr, Patrik	University of Chemistry and Technology, Prague, Czech Republic	Study of axial dispersion on several modern structured and random packings
Sola, Jose Luis	RVT Process Equipment GmbH, 96349 Steinwiesen, Germany	The new EcoMarine #2 random packing: An innovative product for flue-gas desulfurization on marine ships
Solis-Sanchez, Jose Luis	Universidad de Guanajuato, Mexico	Novel Process for Levulinic Acid Production Using Reactive Distillation.
Sorensen, Eva	University College London (UCL), United Kingdom	An optimisation-based comparison of different dividing wall column configurations Optimal design and operation of flexible reactive distillation processes Optimal design and operation of hybrid distillation/pervaporation processes Optimal design of hybrid dividing wall columns for azeotropic separations Presenter
Spencer, Greg	Koch Engineered Solutions Limited, UK	The Development and Applications of a New Mass Transfer Tray Device
Srivastava, Tanya	TNO, Netherlands, The	Solvent Management by Oxygen Removal in Amine based Post Combustion CO2 Capture Presenter
Starrantino, Andrew	School of Chemical Engineering, Oklahoma State University, Stillwater, OK 74078	The Influence of Physical Properties on Structured Packing HETP Correlations Presenter
Staud, Rolf	Technical University of Braunschweig, Germany	Experimental investigation of foam in packed distillation columns Presenter
Stephenne, Karl	Shell Technology Centre Bangalore, India	Optimizing Mass Transfer for Post Combustion Carbon Capture
Stevnsborg, Mads	Department of Chemical and Biochemical Engineering, Technical University of Denmark, Denmark	Digitalization of a Periodic Stripper Unit for Real-Time Data Integration with Predictive Modelling Presenter
Strodtmann, Laura	Technische Universität Braunschweig, Germany	Investigations on thermosiphon reboiling using foaming liquid mixtures Presenter
Suarez-Toriello, V. Alejandro	CONACYT-CIATEC A.C., Centro de Innovación Aplicada en Tecnologías Competitivas	Upscale of reactive-transport phenomena in catalytic distillation units
Summers, Daniel R.	Sulzer Chemtech USA, Inc. (retired); Retired from Sulzer USA	100 Years of Distillation with Trays and Packings and Beyond C3 Splitter Revamp to Improve Separation Efficiency and Capacity
Sun, Zhenlong	Technical University of Braunschweig, Germany	Experimental investigation of foam in packed distillation columns
Szucs, Marton Tamas	Budapest University of Technology and Economics, Department of Building Services and Process Engineering, Hungary	Opimisation of a Batch Distillation Process by Applying Surrogate Models
TA, Hong-Duc	Hanoi University of Science and Technology, Vietnam	A feasible divided wall column process for the purification of cinnamic aldehyde from Vietnam's Cinnamomum Cassia oil
Tammaro, Daniele	Department of Chemical, Materials and Production Engineering, University of Naples Federico II – P.le Tecchio 80, 80125 Naples, Italy	Performances of an advanced Y-type structured packing produced by 3D foam-printing for packed towers in FGD process intensification
TANO, N'Guessan Romaric	UMR 782 SayFood, AgroParisTech-INRAE, Paris-Saclay University, France	Study By Simulation Of The Behavior Of Aroma Compounds during Malt Whisky Distillation With A Stupfler Type Filling Column.
Tawarmalani, Mohit	Purdue University, United States of America	A More Comprehensive Formulation to Rapidly and Reliably Screen for Energy-Efficient Distillation Configurations
Taylor, Ross	Clarkson University, United States of America	Parallel column model for Reactive Dividing Wall Column simulation Rate-Based Column Simulation in the Complex Domain The unexpected weirdness of rate-based simulation of some high-pressure column operations Presenter
Thielert, Holger	thyssenkrupp Industrial Solutions AG, Germany	Wet-oxidative gas desulfurization under avoidance of solid sulfur precipitation
THOMAS, Diane	University of Mons - Faculty of Engineering, Belgium	Kinetics in DEEA-MAPA-H2O-CO2 systems for the post-combustion CO2 capture by absorption-regeneration using demixing solvents Presenter
Thommes, Matthias	Institute of Separation Science & Technology, Friedrich-Alexander-University Erlangen-Nürnberg, Germany	Loading & Flooding in Mellapak Structured Packing: Radiographic & Computer-Tomographic Insights
Tréméac, Brice	Lafset - Laboratoire du froid et des systèmes énergétiques et thermiques, CNAM, Paris	Measuring local condensation heat transfer coefficients in cryogenic conditions.
Trescher, Lea	Ulm University, Institute of Chemical Engineering, Thermal Process Engineering	First Impressions of Multiple Dividing Wall Column Operation: Design and First Experimental Results
Triebl, Andrea	Montanuniversität Leoben, Austria	Further development of the guideline for standardized characterization measurements of packed columns Presenter
Tsachouridis, Vasileios	Saudi Aramco, Saudi Arabia	Root Cause Analysis for Structured Packing Failure (Case Study)
Tsatse, Aikaterini	University College London (UCL), United Kingdom	Optimal design and operation of flexible reactive distillation processes Presenter
Tukur, Nasiru	Saudi Aramco, Saudi Arabia	Root Cause Analysis for Structured Packing Failure (Case Study)
Tyraskis, Ioannis	TNO, 1755 ZG, Petten, the Netherlands	Comparison of VCHP and MVR assisted distillation of MEG-water mixture via dynamic simulations Presenter
Ujević Andrijić, Željka	University of Zagreb, Faculty of Chemical Engineering and Technology, Croatia	The development of soft sensors for continuous estimation of the distillation 95% point of diesel product
Uusi-Kyyny, Petri	Aalto University, School of Chemical Engineering, Department of Chemical and Metallurgical Engineering, P.O. Box 11000, FI-00076 Aalto, Finland	Conceptual design of distillation process for the separation of styrene monomer from polystyrene pyrolysis oil: experiment and simulation
Valenz, Lukáš	University of Chemistry and Technology, Prague, Czech Republic	Mutual verification of the gas-phase volumetric mass-transfer coefficients determined in the packed absorption column Presenter Study of axial dispersion on several modern structured and random packings Presenter Mass-transfer model for distillation columns equipped with structured packings Thermographical determination of the effective mass transfer area of distillation
Venkatesan, Saravanan	Shell Technology Centre Bangalore, India	Optimizing Mass Transfer for Post Combustion Carbon Capture
Vennavelli, Anand N	Koch-Glitsch, United States of America	Digitalization of a Coker Fractionator Using TOWER VIEW® software Presenter
Vieira de Melo, Silvio Alexandre	Technische Universität Berlin, D-10623 Berlin, Germany	Intensification of CO2 Capture from Methane-rich Streams Using a Rotating Packed Bed Absorption Column
VILCOCQ, Léa	CP2M (Catalyse, Polymérisation, Procédés et Matériaux), France	Black liquor valorization via reactive distillation and heterogeneous catalysis
Vilela Weikert, Clara	State University of Campinas, Brazil	Are Deep Eutectic Solvents Feasible for Simultaneous Capture of CO2 and H2S from Natural Gas? EVALUATION OF CHEMICAL ABSORPTION AND SOLVENT REGENERATION FOR CO2 CAPTURE FROM FLUE GASES WITH DIFFERENT DESIGN CONFIGURATIONS
Villadsen, Sebastian Nis Bay	CERE, Dept. Chem. Biochem. Eng., Tech. Univ. Denmark	BE-Clean: P2X technology for gas desulphurization
Vishwakarma, Vineet	Institute of Fluid Dynamics, Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstraße 400, 01328 Dresden, Germany	Measuring tray and point efficiencies in hydraulic air/water column mockups via air-stripping of isobutyl acetate in aqueous solution
Vitu, Stéphane	Université Paris-Saclay, INRAE, AgroParisTech, UMR Sayfood, 91300 Massy, France; CNAM, 75003 Paris, France	Measurement of vapor-liquid equilibria of ß-damascenone and simulation of its behavior during a batch distillation
Voggenreiter, Johannes	Technical University of Munich, Laboratory of Chemical Process Engineering, Straubing/Germany	Reactive distillation of mixtures containing formaldehyde, methanol, water, and poly(oxymethylene) dimethyl ethers on pilot-scale
von Morstein, Olaf	thyssenkrupp Industrial Solutions AG, Germany	Wet-oxidative gas desulfurization under avoidance of solid sulfur precipitation
Waibel, Yannick	Ulm University, Institute of Chemical Engineering, Thermal Process Engineering	First Impressions of Multiple Dividing Wall Column Operation: Design and First Experimental Results Presenter
Wang, Erqiang	University of Chinese Academy of Sciences, China, People's Republic of	Heterogeneous Azeotropic Separation with Intermediate Boiling Point: from Thermodynamic Analysis to Process Design
Wang, Mingmei	University of Chinese Academy of Sciences, China, People's Republic of	Heterogeneous Azeotropic Separation with Intermediate Boiling Point: from Thermodynamic Analysis to Process Design Presenter
Wattiau, mikael	Air Liquide, France; Air Liquide Research and Development, 1 Chemin de la Porte des Loges, Les-Loges-en-Josas 78350, France	From 2 tons per hour to 2 tons per second of oxygen Visualization of recirculation zones over a perforated plate: An optical flow technique for characterization of fluid dynamics in structured packing
Weckesser, Stephanie	Helmholtz-Zentrum Dresden-Rossendorf, Germany	Numerical simulation of the two-phase flow at a single trapezoid fixed valve using a hybrid CFD approach
Wende, Marc	Chair of Fluid Process Engineering, Paderborn University, Paderborn, Germany	Modelling of a hybrid process combining zero gravity distillation and vapour permeation Presenter
Wiedemann, Philipp	Helmholtz-Zentrum Dresden-Rossendorf, Germany	Numerical simulation of the two-phase flow at a single trapezoid fixed valve using a hybrid CFD approach Presenter
Wilharm, Thomas	ASG Analytik-Service AG	Investigation of an innovative control method for cyclic operation of reactive distillation columns
Wilson, Jonathan	1940 Air Products Blvd Allentown PA 18106 USA	Liquid Holdup Distribution in Structured-Packed Columns via Gamma-Ray Computed Tomography
Winkler, Thomas	Technical University of Munich, Germany	Investigation of liquid maldistribution in a random packed column operated as a cooling tower Presenter
Wolf Maciel, Maria Regina	State University of Campinas, Brazil; School of Chemical Engineering- State University of Campinas	Are Deep Eutectic Solvents Feasible for Simultaneous Capture of CO2 and H2S from Natural Gas? Presenter EVALUATION OF CHEMICAL ABSORPTION AND SOLVENT REGENERATION FOR CO2 CAPTURE FROM FLUE GASES WITH DIFFERENT DESIGN CONFIGURATIONS Presenter Recovery and characterization of cellulosic ethanol from fermentation of sugarcane bagasse
Wolf-Zöllner, Verena	Montanuniversität Leoben, Austria	Further development of the guideline for standardized characterization measurements of packed columns The new EcoMarine #2 random packing: An innovative product for flue-gas desulfurization on marine ships Automated detection of loading and flooding points in packed columns
Wurm, Julian	TU Berlin, Germany	Wet-oxidative gas desulfurization under avoidance of solid sulfur precipitation Presenter
Xia, Marc Fan	Technical University of Munich, Department of Mechanical Engineering, Institute of Plant and Process Technology, Garching/Germany	Improving Design and Scale-up of Columns with Structured Packings by Means of CFD Presenter
Xing, Lei	Loughborough University	Carbon Dioxide Removal from the atmosphere by weathering minerals in a gas-liquid-solid contactor.
Xu, Shaoyou	Technical University of Braunschweig, Germany	Experimental investigation of foam in packed distillation columns
Yamakawa, Celina	Technical University of Denmark	Recovery and characterization of cellulosic ethanol from fermentation of sugarcane bagasse
Yang, Aidong	University of Oxford, United Kingdom	Carbon Dioxide Removal from the atmosphere by weathering minerals in a gas-liquid-solid contactor.
yang, quan	Sulzer Chemtech	Troubleshooting Liquid Side Draw-off Trays
Yelland, Thomas	Carbon Clean, 3 Valentine Place, London, SE1 8QH, U.K.	Intensifying Modular Carbon Capture
Yuan, Xigang	Tianjin University, China, People's Republic of	Influence of dividing wall position on performance of dividing wall column with vapor feed Presenter Smooth Penalty Function Method for Rigorous Optimization of Distillation Processes
Zanghelini, Gabriela	Université Paris-Saclay, INRAE, AgroParisTech, UMR Sayfood, 91300 Massy, France	Measurement of vapor-liquid equilibria of ß-damascenone and simulation of its behavior during a batch distillation Presenter
Zhou, Jingsong	Clarkson University, United States of America	The unexpected weirdness of rate-based simulation of some high-pressure column operations
Ziegler, Ralf	Siemens AG, Germany	Troubleshooting a Column - Problem and Solution
Zimmer, Laurent	EM2C, CentraleSupélec, Université Paris-Saclay, 3 rue Joliot-Curie, 91192 Gif-sur-Yvette, France	Visualization of recirculation zones over a perforated plate: An optical flow technique for characterization of fluid dynamics in structured packing
Zitzewitz, Philip	Evonik Operations GmbH, Germany	Modeling distillation columns for practical purposes Presenter
Zivdar, Mortaza	Professor, Chemical Engineering Department, University of Sistan and Baluchestan, P.O. Box 98135-674, Zahedan, Iran	Simulation and Control of C9-C10 Aromatics Splitter Column of Bouali Sina Petrochemical Company
Zoubida, LOUNIS	1Laboratoire d’Ingénierie de la Sécurité Industrielle et du Développement Durable, Institut de Maintenance et de la Sécurité Industrielle, Université Oran 2, Algérie	CO2 capture from syngas by absorption process using fluorinated anion ionic liquids