1	:Loading modifier cache ...
2	:Failed reading modifier cache
3	:Enter an integer value
4	:Enter a real value
5	:Select one of the available options
6	:Enter a text value
7	:Enter a filename
8	:Failed reading modifier table
9	:No part currently active.
10	:[i]Select "Done" to continue
11	:Done
12	:Bad list separator
13	:Unexpected end of list
14	:Ambiguous range specified
15	:Value list not valid
16	:Integer value expected
17	:Integer/floating-point value expected
18	:Value out of range
19	:String length too short
20	:String length too long
21	:Invalid character
22	:List length exceeded
23	:A value for "%s"\nmust be entered.
24	:If "%s" is selected,\na value must be entered.
25	:Command not implemented
26	:Maximum number of windows already displayed (16)
27	:Hold and drag left mouse button to select window
28	:Hold and drag left mouse button to reposition view
29	:... select 'to' point
30	:(Remote zoom) Hold and drag left mouse button to select window
31	:2 previous locations required to set up a linear array.
32	:A previous location is required to set up a radial array.
33	:No polygon to close.
34	:Error reading Attribute file:\n<%s>
35	:Cannot open\n"%s"
36	:A maximum of 16 characters are allowed for Attribute names
37	:Attribute names must be alphabetic
38	:Attribute "%s" does not exist
39	:Attribute "%s" must have at least one value
40	:Attribute values must be comma separated
41	:Attribute "%s" does not take a value
42	:Attribute "%s" takes integer values only
43	:Attribute "%s" takes real values only
44	:Attribute "%s" takes a single text value
45	:[e]Grid pitch out of range.
46	:[e]Grid axis angles out of range.
47	:A previous location is required to make a radial move.
48	:Real value expected
49	: %d entities found 
50	:Redraw drawing
51	:Zoom window
52	:Zoom drawing
53	:Zoom extents
54	:Zoom in
55	:Zoom out
56	:Scroll left
57	:Scroll up
58	:Scroll right
59	:Scroll down
60	:Scroll drawing
61	:Pop up auxiliary display window
62	:Remote zoom on main window
63	:Enter 3 points
64	:Enter origin, radius distance, start point and end point
65	:Enter origin, start point and end point
66	:Enter origin, radius distance and end point
67	:Enter origin and end point
68	:Enter origin, radius distance and start point
69	:Enter origin and start point
70	:Enter origin and radius distance
71	:Enter origin of arc
72	:Enter b-spline control points
73	:Enter origin of circle
74	:Enter diameter end points
75	:Enter origin of cpoint
76	:Enter origin of ellipse
77	:Enter origin and major radius distance
78	:Enter origin and minor radius distance
79	:Enter origin, major and minor radius distance
80	:Enter origin and rotation angle
81	:Enter origin, major radius distance and rotation angle
82	:Enter origin, minor radius distance and rotation angle
83	:Enter origin, major and minor radius distance, and rotation angle
84	:Enter polygon boundary
85	:Enter window extents
86	:Enter spline control points
87	:Enter 2 or more end points
88	:Enter Cross-hatch boundary
89	:Select reference entity
90	:Enter start point on reference entity and end point
91	:Select 1 or 2 reference entities
92	:Enter a reference point
93	:Enter side reference point, start point and end point
94	:Enter start point and end point
95	:Enter a point on the required side
96	:Select entity to break
97	:Enter break point
98	:Select 2 entities to break at intersection
99	:Select reference entity, then 1 or more entities to break
100	:Select 1 or more arcs
101	:Select 1 or more b-splines
102	:Select spline, b-spline or bezier
103	:Select 1 or more ellipses
104	:Select 1 or more entities
105	:Select 1 or more polygons
106	:Select polygon to edit
107	:Enter a polygon sub-boundary
108	:Select polygon sub-boundaries
109	:Enter a modified boundary sub-section
110	:Select string
111	:Enter a modified sub-section
112	:Select 1 or more cross-hatch entities
113	:Select cross-hatch entity
114	:Enter stretch vector as 2 locations
115	:Select entity to trim
116	:Enter trim point
117	:Select to entities to trim at intersection
118	:Select reference entity, then 1 or more entities to trim
119	:Select line to trim
120	:Select 1 or more entities
121	:Enter 2 points to define the mirror axis
122	:Enter 2 points to define the move vector
123	:Enter a reference point then 1 or more move vectors
124	:Enter rotation axis point
125	:Enter rotation axis point, reference point and rotation vector
126	:Enter rotation axis point, reference point, then 1 or more rotation vectors
127	:Enter scale origin point
128	:Enter window extents
129	:Enter 2 points to define the translation vector
130	:Select 1 or more text entities
131	:Select 1 or more text-node entities
132	:Select reference entity
133	:Enter 1 or more locations
134	:Select a terminal
135	:Enter text location (top line)
136	:Select a text entity
137	:Select 1 or more symbol entities
138	:Enter symbol local origin point
139	:Enter locations starting with the pointer position, ending at the label position
140	:Enter arrowhead location followed by extension locations
141	:Enter arrowhead location and direction fixing point
142	:Select reference entity
143	:Select 1 or more control points on the curve
144	:Select the control point to remove
145	:Select boundary vector for new control point
146	:Enter the new control point
147	:Select reference text entity
148	:Enter 2 locations to mark text extents
149	:Select 1 or more parent entities
150	:Select 1 or more child entities
151	:Select all entities forming a mutual relationship
152	:Select a seed entity
153	:Select 1 or more dimension entities
154	:Select dimension viewport
155	:Select reference dimension
156	:Enter dimension reference points
157	:Select reference arc/circle
158	:Enter extents of viewport window, or Next for the Sheet extents
159	:Enter viewport origin, or Finish if lower-left corner of window is required
160	:Enter move vector on SHEET viewport
161	:[i]Select continue to reset
162	:Warning, XCDATA not set - using "."\n
163	:Warning, XCSYMDIR not set - using "."\n
164	:Select viewport
165	:Enter viewport origin on SHEET viewport
166	:Enter grid origin
167	:Enter 1 or more circle positions
168	:Enter bezier control points
169	:Enter spline control points
170	:Enter origin of symbol and direction vector
171	:Enter scale origin, followed by 'from' and 'to' transform points
172	:Select net-line entity
173	:Select 1 or more net-line entities
174	:Select network seed net-lines
175	:Select net-line in which to insert component
176	:Enter symbol position in net-line
177	:Enter route of net-line
178	:Enter position of label text
179	:Select 1 or more line/string/net-line entities
180 	:Enter 1 or more integers\nseparated by commas...
181 	:Enter 1 or more reals\nseparated by commas...
182 	:Enter a text value...
183	:Select 1 or more symbol/terminal parent entities
184	:Select a symbol parent
185	:Select a terminal/net-line parent entity
186	:Select host entities
187	:Select dependent entities
188	:Enter extents of ellipse
189	:Enter polygon window boundary
190	:Select 'standard' entities
191	:Select 'static' entities
192	:Select 'translate' entities
193	:Select 'stretch' entities
194	:Select 'proportional spaced' entities
195	:Select 'repeatable' entities
196	:Enter symbol local origin
197	:Enter symbol local origin and translate reference origin
198	:WARNING\nNo license found,\nrunning in demo mode.
199	:Select a symbol entity
200	:Enter symbol local origin, translate and proportional reference points
201	:Saving drawing ...
202	:[i]A recovery drawing exists,\nwould you like to preview it (OK),\nor remove it (Cancel)?
203	:[w]License server down, the drawing\nwill be saved as "%s".\nNo more saves can be made.
204	:Enter 1, 2, or 3 locations to set angle
205	:Select 1 or 2 entities
206	:Select one or more reference entities
207	:Select interval to be removed
208	:Use Window or Pwindow modes to select unblank area
209	:Enter clip segment start and end points
210	:Select a text-node
211	:Select entity to clip
212	:Zoom to an Image
213	:Select a construction-point entity
214	:Select entity to measure
215	:Enter 2 or more locations to define measured path
216	:Select one or more terminal entities
217	:Enter origin of plane
218	:Select one or more blocks
219	:Enter clip window or [finish] to plot whole drawing
220	:Zoom to a block
221	:Enter a reference point ...
222	:Enter reference point followed by the move vector
223	:Enter reference point followed by one or more move vectors
224	:Select a reference block
225	:Select one or more destination blocks
226	:Select block for comparison
227	:[w]Are you sure you want\nto remove this icon ?
228	:[w]The icon image\n"%s"\nexists, OK to overwrite it ?
229	:[e]The icon has been modified,\na filename must be entered.
230	:[i]The icon has been modified,\ndo you want to save it as\n"%s" ?
231	:[e]Failed to write\n"%s".
232	:Select entity containing attributes followed by entities to receive attributes
233	:Enter 2 locations to define symbol fit rectangle
234	:Enter 2 locations to define the minimum extent or [next] to keep current extent
235	:Enter 2 locations to define the maximum extent
236	:Select an entity to be configured
237	:Enter 2 locations to define the symbol movement axis or [next] to keep current axis
238	:Select entities to take cloned properties
239	:Select symbols in desired order
240	:Select a reference entity
241	:Select one or more destination entities
242	:[e]Only one file at a time can be dropped.
243	:Zoom to previous display
244	:Zoom to next display